Select your vehicle

Dynomax AccuSeal Exhaust Band Clamp – 36434

Dynomax Exhaust

$12.58In stock
Buy on Amazon

See similar parts on Amazon

Price and availability as of Nov 18, 2026 12:00 AM MST, from Amazon.com, and subject to change. The Amazon listing has the current details.

Check out with your Amazon account. Amazon handles delivery and returns.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Dynomax AccuSeal steel band exhaust clamp, part number DYN36434
  • 360 degree seal, lap-joint design for pipes of differing diameters
  • Pre-attached hardware and Grade 8 bolts; universal fit

Description

Overview

The Dynomax AccuSeal band clamp, part number DYN36434, is a steel band-style exhaust clamp for joining two exhaust pipes. Its design makes a 360 degree seal without crushing the pipe, which helps preserve exhaust flow. It is made as a lap joint for pipes of differing diameters and is universal fit.

The clamp comes with pre-attached hardware and Grade 8 bolts, which provide high strength and temperature durability.

Key features

  • 360 degree seal
  • Lap-joint design for pipes of different diameters
  • Pre-attached hardware
  • Grade 8 bolts for strength and temperature durability

Sealing an exhaust joint

An exhaust joint has to stay gas-tight through heat cycles, vibration and road moisture. A band clamp works by drawing its edges together around the overlap, so the seal depends on the pipes being round, clean and evenly overlapped. Burrs, dents or rust on the pipe ends can keep the band from seating fully and may cause a leak that shows up as a ticking sound near the joint. Take a moment to inspect both ends before you start.

After fitting, start the engine and check the joint while it is warm. Look for soot marks, a hissing sound or an exhaust smell at the clamp. Retighten the bolts evenly once the system has cooled slightly, following the tension that the fasteners allow. Clamps can loosen over time, so recheck them after the first few drives and periodically afterward. A joint that stays tight is far easier to live with than one that needs repeated attention.

Specifications

Brand Dynomax Exhaust
Part number DYN36434
Product line AccuSeal
Style Band-style clamp
Material Steel
Seal 360 degree
Fasteners Grade 8 bolts with pre-attached hardware

Vehicle fitment

It is a universal fit clamp, so it is not tied to a make, model or year. Check that your two pipes overlap at the joint and that their diameters suit a lap joint.

Confirm your vehicle’s year, model and trim before ordering.

What’s included

Pre-attached hardware and Grade 8 bolts.

Not included: the exhaust pipes being joined.

Questions & Answers

Does the DYN36434 AccuSeal clamp work on different pipe sizes?

Yes. The clamp is made to lap-join two pipes of differing diameters. Confirm both pipe diameters and the overlap before fitting the clamp to your exhaust.

Does the DYN36434 include bolts?

Yes. It comes with pre-attached hardware and Grade 8 bolts for strength and temperature durability. Check the fasteners when they arrive, and compare them with the joint you are building before tightening.

Is the DYN36434 vehicle specific?

No. It is a universal fit clamp, so no make, model or year applies. Match the clamp to the diameters of your exhaust pipes and confirm the fit for your setup before installing.

How do you clean pipe ends before fitting a band clamp?

Wire brush or sand the pipe ends until the surface is bare metal and free of scale. Remove burrs with a file so the band rests flat. A clean, round end helps the clamp seal evenly and reduces the chance of leaks at the joint.

Ready to order?

Order this part on Amazon and check out with your Amazon account. Amazon handles delivery and returns.

Buy on Amazon