Select your vehicle
-13%

Dynomax Cat Back Exhaust System – 19312

Dynomax Exhaust

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Dynomax cat-back exhaust system, part number DYN19312
  • Fits 1999–2001 Jeep Grand Cherokee (WJ) in Laredo and Limited trims
  • Aluminized steel, single rear exit, 2.5-inch tubing
  • Tip included

Description

Overview

The Dynomax cat-back exhaust system, part number DYN19312, is an aluminized steel single rear exit system for the 1999–2001 Jeep Grand Cherokee (WJ) in Laredo and Limited trims. It replaces the exhaust from the catalytic converter back and comes with the tip included.

The system uses 2.5-inch tubing. Dynomax says its exhaust systems move from CAD design and engineering through advanced CAM processes, and the brand presents that process as the foundation of its performance technology.

Key features

  • Single rear exit
  • Aluminized steel construction
  • 2.5-inch tubing
  • Tip included

Aluminized steel in service

Aluminized steel is coated with an aluminum layer that resists rust better than plain mild steel, but it is still steel. Road salt, mud and wet weather will eventually work through thin spots, especially at welds and where the pipe meets a hanger. Regular checks keep a small patch of surface rust from becoming a hole.

When fitting an older Grand Cherokee, clean the mating surfaces at the flange and check the pipe for crushed sections before you tighten anything. Heat shields near the floor and fuel lines should be reinstalled after the work. Replacing the hangers at the same time as the system is a sensible step on a WJ that has seen many winters.

  • Look for flaking or pitting at welds
  • Clean flange faces before tightening
  • Replace worn hangers during the install

Specifications

Brand Dynomax Exhaust
Part number DYN19312
System type Cat-back
Exit Single rear
Material Aluminized steel
Tubing size 2.5 inches
Tip Included

Vehicle fitment

It fits the 1999–2001 Jeep Grand Cherokee (WJ) in Laredo and Limited trims.

Later Grand Cherokee generations are not on this list. Confirm your vehicle’s year, model and trim before ordering.

What’s included

The tip is included. Check the mounting hardware against your installation before starting.

Fitment

VehicleYearsTrims
Jeep Grand Cherokee (WJ)1999–2001Laredo, Limited

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does the Dynomax DYN19312 fit a 2000 Jeep Grand Cherokee?

Yes, if your 2000 Grand Cherokee is a WJ in Laredo or Limited trim. It covers 1999–2001 WJ models in those trims, so confirm your trim before ordering.

Is the tip included with this cat-back?

Yes. The tip is included with the single rear exit and 2.5-inch tubing. It is an aluminized steel cat-back that replaces the exhaust from the catalytic converter back.

What material is the Dynomax 19312 made from?

The system is made from aluminized steel, and the tubing is 2.5 inches. No stainless or coated version is available under this part number.

How do I tell if an aluminized steel exhaust needs replacing?

Look for holes, flaking or heavy rust at welds, joints and hangers. Exhaust noise that gets louder over time or a smell of fumes inside the cabin also means the system should be inspected and repaired or replaced.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon