Overview
The Dick Cepek DC-2 17×9 wheel in black is a 17-inch aluminum wheel, 9 inches wide, with a 6 on 5.5 bolt pattern and part number D/C90000000497. It carries a -12 offset and 4.5 backspacing, two measurements that decide how the wheel sits against the hub, brakes and suspension. Dick Cepek gives it universal fit, so no particular truck or SUV is named.
The DC-2 has a gloss black face with machined accents. The finish is protected by a UV clear coat, which helps the wheel hold up in harsh climates and makes routine cleaning simpler.
Key features
- 17-inch diameter and 9-inch width in a 6 on 5.5 bolt pattern
- Aluminum construction with a black finish and machined accents
- UV clear coat for durability and easier care
- -12 offset and 4.5 backspacing for clearance planning
- DC-2 style from the Dick Cepek lineup
Mounting checks for a 17-inch wheel
A 17-inch wheel with a 9-inch width changes the tire options and the clearance at the fender, so tire size should be selected together with the wheel. Backspacing and offset decide how far the wheel sits inward or outward, and a small change can bring the tire against a control arm or a brake caliper. Measure at full steering lock and at full suspension compression after mounting.
Lug nuts should be retorqued after the first few drives on a new wheel, and checked again after rough trail use. Inspect the lug seats for wear, and keep the wheel and tire balanced to avoid vibration that can loosen fasteners over time.
- Tire diameter and load rating
- Lug nut seat type and length
- Caliper clearance at full lock
- Spacer compatibility if used
Specifications
| Brand | Dick Cepek |
|---|---|
| Part number | D/C90000000497 |
| Style | DC-2 |
| Finish | Black with machined accents |
| Construction | Aluminum |
| Wheel diameter | 17 inches |
| Wheel width | 9 inches |
| Bolt pattern | 6 on 5.5 |
| Offset | -12 |
| Backspacing | 4.5 |
| Fitment | Universal fit |
Vehicle fitment
No specific vehicle is named for this wheel. Universal fit is a general designation rather than a model match, so the bolt pattern, offset and backspacing decide whether a given truck works. Measure your hub and compare the wheel width with your fender and tire plan before choosing it.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Compare the 6 on 5.5 pattern and -12 offset with your hub and brake calipers before mounting. Tire size and sidewall height change the final clearance, so check the assembled wheel and tire against the fender and suspension travel.
What’s included
This wheel has universal fit, so no specific truck or SUV is identified. Compare the 6 on 5.5 bolt pattern, -12 offset and 4.5 backspacing with your hub and brake calipers before mounting. Check the year, model and trim of your vehicle before ordering.
Not included: tires, lug nuts and any mounting hardware.








