Overview
The Decked MT5 is a bed organizer storage system for the 2005–2018 Toyota Tacoma with a 5’1 inch bed. It uses a recycled HDPE deck co-molded to a galvanized recycled steel subframe, rated for 2000 lbs of deck payload spread evenly, and includes two drawers for storing tools and hardware.
Drawers carry a 200 lbs per drawer rating and are weatherproof. The handles are oversized cast aluminum, made for use with gloves. Decked gives a 3-year warranty on the system.
Key features
- Recycled HDPE deck co-molded to a galvanized recycled steel subframe
- Deck payload rating of 2000 lbs evenly distributed
- Drawer payload rating of 200 lbs per drawer
- Two full bed-length drawers
- Weatherproof drawers with oversized cast aluminum handles
- A full size drawer takes regular dividers and the D-box, alongside a narrow drawer
- Compatible with a spray-in bed liner and the BedRug mat
Working with a short bed
A 5’1 inch bed leaves little room for error, so the placement of a deck and drawers matters. Plan where the drawers will open and make sure nothing at the tailgate or bed walls blocks them. Load the drawers with tools and hardware in a way that keeps the weight close to the center of the deck.
Routine care keeps a system like this working. After rough trips, check the tie-down points, the drawer wheels and the handles. Wipe the deck to remove grit, since it wears on the drawer tracks over time. Replace any part that cracks or loosens rather than continuing to load it.
- Plan drawer swing before loading
- Keep weight near the center of the deck
- Inspect handles and wheels after rough trips
- Remove grit from the deck and tracks
Specifications
| Brand | Decked Bed Organizer |
|---|---|
| Part number | MT5 |
| UPC | 851945005625 |
| Bed length | 5’1 inch |
| Deck construction | Recycled HDPE co-molded to a galvanized recycled steel subframe |
| System payload | 2000 lbs evenly distributed on the deck |
| Drawer payload | 200 lbs per drawer |
| Drawer extension | Drawers do not fully extend |
| Handles | Oversized cast aluminum |
| Bed liner compatibility | Spray-in liner yes; drop-in plastic liner no |
| BedRug compatibility | Mat yes; full liner no |
| Warranty | 3-year |
Vehicle fitment
The manufacturer fitment list for the MT5 covers the 2005–2018 Toyota Tacoma in the Base, Limited, Pre Runner, SR, SR5, TRD Off-Road, TRD Pro and TRD Sport trims.
Tacoma model years from 2019 onward and other Toyota models are not in this list. Compare the year and trim of your truck with the list above first.
Installation notes
The drawers do not fully extend, and bed liner type matters. Spray-in liners and the BedRug mat are compatible, while a drop-in plastic liner is not supported.
What’s included
Decked’s details cover the drawers, handles and 3-year warranty of this storage system, including one full size drawer and one narrow drawer. Mounting hardware is not separately itemized.






















