Overview
The Decked MN4 is a bed organizer storage system for the 2005–2019 Nissan Frontier with a 6’1 inch bed. The deck is recycled HDPE over a galvanized recycled steel subframe, carrying a 2000 lbs payload spread evenly across the deck, with two drawers for tools and gear.
Its drawers are rated at 200 lbs per drawer and have weatherproof construction. The oversized cast aluminum handles are sized for use with gloves, and the system carries a 3-year warranty. It works with a spray-in bed liner and a BedRug mat.
Key features
- Recycled high density polyethylene deck co-molded to a galvanized steel subframe
- Deck payload rating of 2000 lbs evenly distributed
- Drawers rated at 200 lbs each
- Weatherproof drawers
- Cast aluminum handles sized for gloved hands
- Full size drawer fits regular dividers and the D-box
- Compatible with a spray-in bed liner and a BedRug mat
- Three-year warranty
Matching the organizer to your bed
Before buying a drawer system, measure the bed from the inside of the sidewalls at the floor and confirm the length matches the organizer you are considering. Small differences matter, because a deck that sits even slightly off can bind a drawer. The tailgate and any bed-side storage should also be checked so the drawers can open fully when the tailgate is down.
Once installed, use the deck for items that do not need to slide out, and keep the drawers for tools and hardware that you reach often. Periodically wipe down the deck and confirm the drawers still close flush. A drawer that stops closing evenly usually points to a load problem or a bind in the track.
- Measure the bed at the floor
- Confirm the drawers clear the tailgate
- Keep frequently used tools in drawers
- Check drawer alignment after heavy loads
Specifications
| Brand | Decked Bed Organizer |
|---|---|
| Part number | MN4 |
| UPC | 851945005618 |
| Bed length | 6’1 inch |
| Deck construction | Recycled HDPE co-molded to a galvanized recycled steel subframe |
| System payload | 2000 lbs evenly distributed on the deck |
| Drawer payload | 200 lbs per drawer |
| Drawer extension | Drawers do not fully extend |
| Handles | Oversized cast aluminum |
| Bed liner compatibility | Spray-in liner yes; drop-in plastic liner no |
| BedRug compatibility | Mat yes; full liner no |
| Warranty | 3-year |
Vehicle fitment
The manufacturer fitment list for the MN4 covers the 2005–2019 Nissan Frontier in the Desert Runner, LE, Nismo Off-Road, PRO-4X, S, SE, SL, SV and XE trims.
The XE trim appears only in this MN4 list and not in the MN3 list, so check the trim when choosing between the two. Frontier years before 2005 and after 2019 are not included.
Installation notes
Drawers do not fully extend, and bed liner type affects compatibility. A spray-in liner is compatible, while a drop-in plastic liner is not supported.
What’s included
The system includes the full size and narrow drawers, the storage deck, cast aluminum handles and a 3-year warranty. Check the package contents against your installation before starting.























