Overview
The Daystar PADL223PA is a 1.5-inch coil spring leveling system with urethane bushings, spacers and grade 8 bolts. It is a direct fit design, so the application should be checked against your vehicle before buying.
Installing a leveling kit
Leveling kits work by adding spacer height between the coil spring and the seat, so the spring itself stays in place. Bolts, bushings and spacers all carry load once the vehicle is back on the ground, which makes correct seating important. Work on level ground, support the axle properly and torque the fasteners in the order the installation steps show.
Urethane parts stay firm in cold conditions, so the first drive in winter may feel stiffer than expected. Plan a wheel alignment after the height change, and recheck clearance at full lock and under braking. Replace any damaged bushing instead of reusing it, and keep the removed hardware sorted by location so reassembly matches the original layout.
- Torque bolts again after the first few drives
- Check brake and steering lines for slack
- Re-check alignment after the height change
Specifications
| Brand | Daystar |
|---|---|
| Part number | PADL223PA |
| UPC | 618089008376 |
| Lift | 1.5 inches |
| Suspension type | Coil spring leveling |
| Bushing material | Urethane |
| Bolts | Grade 8 |
| Fitment type | Direct fit |
Vehicle fitment
Compare the kit against your vehicle’s year, model and trim before buying. Leveling hardware varies by platform, so the fit should be verified before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
- Urethane bushings
- Spacers
- Grade 8 bolts









