Overview
The Daystar KF09130BK is a strut extension leveling kit that provides 2 in. of front lift for the 2017–2018 Ford F-150 Raptor. It is built from high density progressive polyurethane, which lifts the vehicle without sacrificing ride quality or load-carrying capacity.
The kit includes front strut spacers and stud extensions. It allows tires up to 35 in. in diameter with factory rims, and it has no metal-on-metal contact, unlike many other leveling kits. A Limited Lifetime Warranty applies.
Key features
- 2 in. front lift with high density progressive polyurethane
- Keeps ride quality and load-carrying capacity
- Allows tires up to 35 in. diameter with factory rims
- No metal-on-metal contact
- Includes front strut spacers and stud extensions
Front suspension changes to expect
Strut spacers raise the front mounts, which changes the geometry at the top of each strut. The new angle places more load on the strut mounts, sway bar links and steering components, so inspect those parts while the front end is apart. Polyurethane is a different material from coil spring steel, and its behavior depends on how well the rest of the front end is maintained.
Tire fit is a common concern with a front lift. Rubbing at full steering lock or on bumps usually means the tire or wheel offset needs checking, and a firm turn with a loaded truck can show clearance problems that were not visible at rest. The higher front end can also stretch brake hoses, so check them for tension at full droop.
Replace worn strut mounts and bushings while the spacers are being installed, since the job is the same and the labor is shared. Keep a record of the alignment reading so future service can be matched to the new height.
- Look for rubbing at full steering lock
- Check sway bar link length after lifting
- Inspect brake hoses for tension
- Re-check torque on strut fasteners after the first drives
Specifications
| Brand | Daystar |
|---|---|
| Part number | KF09130BK |
| UPC | 618089009830 |
| Lift | 2 in. |
| Material | High density progressive polyurethane |
| Included | Front strut spacers, stud extensions |
| Maximum tire size | Up to 35 in. diameter |
| Position | Front |
| Warranty | Limited lifetime |
| Fitment type | Direct fit |
Vehicle fitment
Fits the 2017–2018 Ford F-150 Raptor.
Other F-150 trims and model years are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Strut spacers and stud extensions raise the front mounts, so have the front alignment checked after installation.
What’s included
Front strut spacers and stud extensions.









