Select your vehicle

Daystar 1.5 Inch Coil Spring Leveling Lift Kit – PADL222PA

Daystar

Shop Daystar Suspension Leveling Kits on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Daystar 1.5-inch coil spring leveling system
  • Urethane bushings, spacers and grade 8 bolts
  • Non air-ride vehicles
  • Direct fit; vehicle not named

Description

Overview

The Daystar PADL222PA is a 1.5-inch coil spring leveling system built for non air-ride vehicles. It includes urethane bushings, spacers and grade 8 bolts. It is a direct fit design, so match it to your vehicle’s year, model and trim before buying.

Coil spring leveling basics

Coil spring leveling raises the front end by adding spacer height between the spring and its seat, leaving the spring rate unchanged. That makes the kit a common choice for correcting a nose-low stance on coil spring trucks. Because the change is modest, tire fitment and steering clearance should be checked after the kit goes in, especially with larger tires or a heavier load in the bed.

Urethane components stiffen more in cold weather than rubber, so expect a firmer feel during winter driving. Re-torque fasteners after the first few drives, and inspect the bushings for cracking or wear during regular service. Keep a record of the measured height so any later change is easy to spot.

  • Check tire clearance at full steering lock
  • Recheck fasteners after initial highway use
  • Inspect bushings at each oil change

Specifications

Brand Daystar
Part number PADL222PA
UPC 618089008352
Lift 1.5 inches
Suspension type Coil spring leveling, non air-ride
Bushing material Urethane
Bolts Grade 8
Fitment type Direct fit

Vehicle fitment

Check the application against your vehicle’s year, model and trim before buying. A 1.5-inch kit suits trucks that need a modest height correction.

Confirm your vehicle’s year, model and trim before ordering.

What’s included

  • Urethane bushings
  • Spacers
  • Grade 8 bolts
SKU: DAYPADL222PA Category:

Specification

Shipping weight 11.00 lbs
Package dimensions 10.00 × 8.00 × 8.00 in
brands

Questions & Answers

How much lift does the PADL222PA give?

It gives a 1.5-inch lift with a coil spring leveling system designed for non air-ride vehicles. The kit includes urethane bushings, spacers and grade 8 bolts. Measure ride height before and after installing to confirm the change.

Is the PADL222PA an air-ride kit?

No. The kit is made for non air-ride suspensions, so it works with coil spring trucks and SUVs rather than air-ride systems.

Which trucks fit the PADL222PA?

Fit depends on the platform, so review your year, model and trim before buying. Kits of this type are normally sold for specific coil spring platforms, so check yours first.

Does a leveling kit change ride quality?

It can. Spacers do not alter the spring rate, but a higher front end changes geometry and may feel different on rough roads. Note any new vibration, drift or noise and check the fasteners and steering components.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Daystar Suspension Leveling Kits on Amazon