Overview
The Curt Manufacturing Class III Mount Receiver Hitch, part number CRT31067, is a one-piece receiver hitch for the 2013 to 2017 Ram 3500 pickup.
It fits Big Horn, Laramie, Laramie Limited, Laramie Longhorn, Limited, Lone Star, SLT, ST and Tradesman trims. The design is tailored to those vehicles, so fit depends on matching your trim.
Key features
- One-piece hitch construction
- Class III receiver mount
- Direct-fit design for the 2013 to 2017 Ram 3500
- Laramie Longhorn and Laramie Limited trims are covered
Towing with a Ram 3500
A Ram 3500 is a heavy-duty truck, and its towing capacity depends on the axle, engine and trim. A hitch rated for a class can carry the load only when the truck itself is rated for it. Work out the trailer weight and tongue weight before you attach anything, and keep both inside the truck’s rating.
Gooseneck and fifth-wheel setups use a different hardware path than a standard receiver, so do not assume one replaces the other. If you pull a bumper-pull trailer, the ball mount height should keep the trailer level when loaded. Hitch pins and clips should be checked each time you hitch up and replaced when they wear.
Heavy use wears the hitch and the surrounding frame. Look for cracked welds, rust at the bolt holes and bent tubing after a tough tow. Paint or touch up bare metal early, and retighten the fasteners after the first few trips with a load.
Specifications
| Brand | Curt Manufacturing |
|---|---|
| Part number | CRT31067 |
| Hitch class | Class III |
| Construction | One piece |
| Fitment type | Direct fit |
| Vehicle years listed | 2013–2017 |
Vehicle fitment
It fits the 2013 to 2017 Ram 3500 in Big Horn, Laramie, Laramie Limited, Laramie Longhorn, Limited, Lone Star, SLT, ST and Tradesman trims.
Ram 1500 and Ram 2500 models, and Ram 3500 models from 2018 onward, are not in this list. Confirm your vehicle’s year, model and trim before ordering.
What’s included
Check the package contents against your installation before starting.









