Overview
It is a green, 34-tooth speedometer drive gear for the NP231 transfer case, and it corrects a speedometer that reads off after tire diameter or axle ratio changes. Fitting the right tooth count brings the reading back to true speed. Crown Automotive’s Tire and Gear Ratio Chart helps with choosing that count.
Key features
- 34 teeth for the NP231 transfer case speedometer drive
- Listed color: green
- Nylon gear on a steel shaft
- Direct fit for NP231 transfer case speedometer drives
Fitment checks and the gear swap
The NP231 transfer case is the only application named for this gear, so the first step is to confirm that the case matches before anything else is done. Speedometer drive gears are small and easy to misplace, and their teeth can be damaged by rough handling, so keep the gear clean and in its packaging until installation day. A green color is only a marking and does not change how the gear behaves.
Before swapping the gear, check the fluid level and inspect the seal area, since the o-ring step is the most common delay. Once the gear is in, drive at a steady speed and compare the reading with a GPS app or a second vehicle. Recheck after several drives to confirm the reading has settled, and record your tire size so future comparisons are easier.
- Confirm the transfer case before opening the box
- Inspect the seal area while the gear is out
- Record tire size for future comparisons
- Recheck the reading after several drives
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 52067634 |
| UPC | 848399015263 |
| Tooth count | 34 teeth |
| Compatible transfer case | NP231 |
| Color | Green |
| Gear material | Nylon gear with steel shaft |
Vehicle fitment
It is a direct fit for the NP231 transfer case, so verify the transfer case and your current tire and axle gear setup before buying.
Make sure year, model and trim match your vehicle before buying.
Installation notes
Plan for the 6035709 o-ring: it is not supplied, so either buy one or confirm the factory o-ring is fit to reuse before the gear is changed.
What’s included
A green 34-tooth speedometer drive gear.
Not included: 6035709 o-ring, which must be purchased separately unless the factory o-ring is reused.












