Overview
The Rugged Ridge 18760.01 is a 26 tooth short shaft speedometer gear for electrically driven speedometers on 93-01 Jeep Cherokee (XJ), 93-98 Jeep Grand Cherokee (ZJ) and 93-06 Jeep Wrangler (YJ and TJ) models.
It is a direct replacement for the original gear, with easy installation and no drilling required.
Key features
- 26 tooth count
- Short shaft design
- Electrically driven speedometer application
- No drilling required
- Direct replacement for the original gear, per the manufacturer
Electric versus cable speedometers
Electrically driven speedometers use a sensor at the transfer case that sends a signal to the gauge, and the gear turns that sensor’s rotor. Cable-driven systems instead send a mechanical signal through a cable to the cluster. The two systems use different gears, so identifying the setup before buying is the most important check. Look at the drive location and the gauge connection to see which type is fitted.
Once the speedometer type is confirmed, inspect the sensor wiring and connector for corrosion while the gear is out. A loose or damaged connector can produce erratic readings even with a good gear. Keep the wiring clear of the driveshaft and check that the new gear turns freely by hand before the transfer case is closed up.
- Confirm the speedometer is electric before ordering
- Inspect the sensor connector for corrosion
- Keep wiring clear of moving driveline parts
- Turn the gear by hand to check smooth rotation
Specifications
| Brand | Rugged Ridge |
|---|---|
| Part number | 18760.01 |
| UPC | 804314254223 |
| Tooth count | 26 |
| Shaft length | Short |
| Speedometer type | Electrically driven |
Vehicle fitment
The stated years and models are 93-01 Cherokee, 93-98 Grand Cherokee and 93-06 Wrangler with electrically driven speedometers, which means 1993 to 2001 Jeep Cherokee, 1993 to 1998 Grand Cherokee and 1993 to 2006 Wrangler.
Models outside the stated years, such as the Wrangler JK generation, are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Installation is straightforward and needs no drilling. Cable-driven speedometers need a different gear.
What’s included
Review the package contents against your installation before starting.









