Overview
The Pro Comp Suspension 690001 is a stem to loop shock conversion mount. It lets a shock with a stem end mount to a loop-style bracket, and each kit is complete for one shock.
Key features
- Converts a stem-style shock to a loop mount
- Each kit mounts one shock
- Urethane mounting blocks
- Stainless steel clamps
Choosing a conversion mount
A stem to loop conversion mount lets a shock with one style of eye fit a bracket built for the other. Before buying, measure the shock eye type, the bracket opening and the bolt pattern on the frame or axle side. Urethane blocks absorb small movements and reduce noise, while the clamps hold the shock in place under load. Shocks that run on a mount under constant articulation should be checked more often than those used mainly on pavement.
Inspect the mount after the first few drives. Look for cracked urethane, loose clamps and any sign that the eye is rubbing the bracket. Replace worn blocks rather than stacking them, and re-tighten clamp hardware after the first few drives and periodically after that.
- Match stem and loop ends before ordering
- Check urethane blocks for cracks
- Keep clamps snug after installation
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 690001 |
| UPC | 614901698893 |
| Conversion | Stem to loop |
| Mounting blocks | 2 urethane |
| Clamps | 2 stainless steel |
| Shocks per kit | 1 |
Vehicle fitment
It is a universal fit conversion mount. Stem and loop shock ends must match the mount, so check your shock and bracket before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Two urethane mounting blocks and two stainless steel clamps, enough for one shock.
Not included: Shock absorber.








