Overview
The Crown Automotive Piston Ring Set, part number 4798878, is a standard-size ring set for Jeep engines in the 1996–2000 Cherokee XJ, 1996–1998 Grand Cherokee ZJ, 1999–2000 Grand Cherokee WJ and 1997–2000 Wrangler TJ models. Crown has supplied replacement Jeep parts for more than 50 years and lists over 8,000 part numbers.
Confirm the engine size and ring material against your rebuild before ordering.
Key features
- Standard size
- Standard size rings for the listed Cherokee, Grand Cherokee and Wrangler TJ models.
- Covers multiple Cherokee, Grand Cherokee and Wrangler TJ models
Ring end gap and bore
Piston rings seal combustion pressure and control oil on the cylinder wall, so a ring set has to match the bore and piston in the engine it goes into. Standard size means the rings are sized to the original bore, and the bore should be measured before buying the set.
End gap is the space left between the two ends of a ring when it is installed in the bore. Too little gap can cause the ring to bind as it heats, and too much gap lets combustion gas past. A machine shop typically checks gap with a feeler gauge and adjusts it as needed.
Rings are usually replaced with the pistons during a rebuild. Inspect the ring grooves for carbon buildup and check the cylinder wall for scoring. If the bore is out of round or tapered, rings alone will not restore sealing.
- Measure bore diameter and taper
- Check end gap with a feeler gauge
- Clean ring grooves before installing
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 4798878 |
| UPC | 848399009057 |
| Product type | Piston ring set |
| Size | Standard |
Vehicle fitment
It fits the 1996–2000 Jeep Cherokee (XJ) in Classic, Country, Limited, SE and Sport trims; the 1999–2000 Jeep Grand Cherokee (WJ) in Laredo and Limited trims; the 1996–1998 Jeep Grand Cherokee (ZJ) in Laredo, Limited, Orvis and TSi trims; and the 1997–2000 Jeep Wrangler (TJ) in Sahara and Sport trims.
Other model years are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Ring fitting depends on bore size and ring end gap, so have a machine shop check both before installing the set.
What’s included
This item is a piston ring set only. Check the package contents against your rebuild before starting.









