Overview
The Crown Automotive AX5 shifter boot bezel is a replacement manual transmission shifter bezel for AX5 and AX15 transmissions. Crown Automotive also names NV2550 and NV3550 transmissions, plus T4, AX4, T5 and BA-10/5 manual transmissions, as compatible.
It is a direct fit replacement. A bezel is the trim piece that frames the shift boot, so match the transmission names above against your gearbox before ordering.
Key features
- Shifter boot bezel for AX5 and AX15 transmissions
- Also named for NV2550 and NV3550 transmissions
- Also named for T4, AX4, T5 and BA-10/5 manual transmissions
- Direct fit replacement described by Crown Automotive
Choosing the right bezel
A shifter bezel frames the boot where it meets the floor or console. It holds the boot in place and gives the shifter a clean edge, so a cracked or loose bezel can let dirt work into the opening. The bezel and boot are usually replaced as a pair when the boot is worn, since they fit together as one assembly.
Choosing the right bezel comes down to the transmission type. Gearboxes in the same family can share a shifter layout, but the shape of the opening and the mounting points still need to match. Compare the bezel to the old one before fitting, and check that the shifter moves freely through the opening once it is installed.
- Check the transmission name on the case tag
- Compare the opening shape with the old bezel
- Inspect the boot for tears while the bezel is off
Specifications
| Brand | Crown Automotive |
|---|---|
| UPC | 848399041804 |
| Compatible transmissions | AX5, AX15, NV2550, NV3550, T4, AX4, T5, BA-10/5 (manual) |
| Part type | Shifter boot bezel |
Vehicle fitment
No vehicle years, models or trims are given for this bezel. Fitment is stated by transmission only, as shown in the table above.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One shifter boot bezel.


















