Overview
The Crown Automotive 53004164 is a hydraulic clutch tube and hose assembly for 2.5L engines. It carries fluid from the clutch master cylinder to the slave cylinder hose. It fits the 1980–1983 Jeep CJ5 and CJ7 and the 1981–1983 Jeep Scrambler.
Crown Automotive makes the assembly as a replacement part for Jeep vehicles, and it is a direct fit.
Key features
- Built for 2.5L engine applications
- Connects the clutch master cylinder to the slave cylinder
- Tube and hose combined in one assembly
- Part number 53004164 and UPC 70000693882
Bleeding and checking the clutch
A hydraulic clutch line is a closed system, so air that enters during a hose replacement will make the pedal feel soft or spongy. Bleeding removes that air, starting at the slave cylinder and working back toward the master cylinder. Keep the reservoir topped up during the process so air is not drawn back in.
Rubber hoses age from heat and fluid exposure, so cracks, bulges and seepage at the crimped ends are common signs of wear. Check the line near the frame rail and any clips where it may rub. A hose that swells under pedal pressure should be replaced rather than trusted for another season.
- Bleed until the fluid runs clear of bubbles
- Check each fitting for seepage before driving
- Inspect the slave cylinder seal when the line is removed
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 53004164 |
| UPC | 70000693882 |
| Engine | 2.5L |
| Connection | Clutch master cylinder to slave cylinder hose |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 1980–1983 Jeep CJ5 (Base, Golden Eagle, Laredo, Limited, Renegade), the 1980–1983 Jeep CJ7 (Base, Golden Hawk, Laredo, Limited, Renegade) and the 1981–1983 Jeep Scrambler (Base, SL, SR).
Confirm your engine is a 2.5L and that your year, model and trim match before ordering.
Installation notes
Opening a hydraulic clutch line lets air into the system, so the clutch must be bled after the new assembly is connected. Fittings should be checked for leaks before the vehicle is driven.
What’s included
One hydraulic clutch tube and hose assembly.
Not included: Clutch fluid, the master and slave cylinders and fittings are not included with this assembly.









