Overview
The Crown Automotive J5362158 is a fuel filler hose for a 20 gallon tank, measuring 1” at its smaller end and 1-3/16” at its flared end. These two end sizes are the first things to compare with the hose you are replacing.
Check the hose length, material and full diameter set before fitting. Confirm those figures against the hose you are replacing.
Key features
- Designed for a 20 gallon tank
- 1” at the smaller end
- 1-3/16” at the flared end
- Fuel filler hose design
Flared ends and hose sizing
Fuel filler hoses with one flared end and one straight end usually connect to two different parts: the filler neck on one side and the tank or a transition fitting on the other. The flared end seats over a tapered neck, while the smaller end slides onto a fitting that needs a clean, round surface. Matching these two ends to the hose you remove prevents most leaks.
Before buying, check how the old hose bends and where its clamps sit. A new hose that is too stiff or too short will pull on the joints and wear them faster. Look at the connection points on the filler and tank side, and plan for a clamp at each end. Replace any worn grommet or clip you find along the route.
- Note which end is flared
- Inspect the filler neck for dents
- Use clamps sized to each end
- Keep the hose clear of exhaust heat
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | J5362158 |
| UPC | 848399064803 |
| Tank size | 20 gallon |
| Smaller end | 1” |
| Flared end | 1-3/16” |
| Part type | Fuel filler hose |
Vehicle fitment
Compare the tank size and hose ends with your vehicle before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One fuel filler hose. Clamps aren’t mentioned.









