Overview
The Crown Automotive front pipe to manifold seal, part number CRO52005431, seals the connection between the front exhaust pipe and the exhaust manifold on the 4.0L engine. Crown Automotive makes and distributes replacement Jeep parts. It fits four Jeep models.
Key features
- Front pipe to manifold seal
- Designed for the 4.0L engine
- Fits Cherokee XJ, Grand Cherokee ZJ and Wrangler YJ and TJ
- Crown Automotive part number CRO52005431
Manifold and pipe joint sealing
The seal at the manifold and front pipe joint takes the full heat of the exhaust, and it is one of the places where leaks tend to start on older 4.0L Jeeps. A failing seal often causes a tick near the engine that is loudest when cold, and it can let exhaust fumes reach the cabin at idle. Because the joint is close to the steering and suspension, a leak can also be hard to pinpoint without a careful inspection.
When replacing the seal, inspect the manifold flange and the pipe flange for warping and debris. Studs and nuts can corrode and break, so check them before final assembly and replace any that are damaged. Tighten the fasteners evenly and recheck them after the engine has warmed up and cooled a few times.
- Inspect manifold and pipe flanges for warping
- Check studs and nuts for corrosion
- Tighten evenly and recheck after warm-up
- Look for soot near the joint after installation
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | CRO52005431 |
| Engine | 4.0L |
| Component | Front pipe to manifold seal |
Vehicle fitment
It fits the 1991-2000 Jeep Cherokee (XJ), 1993-1998 Jeep Grand Cherokee (ZJ), 1997-2000 Jeep Wrangler (TJ) and 1991-1995 Jeep Wrangler (YJ). Confirm fit for your vehicle’s year, model and trim before ordering.
Wrangler JK and Grand Cherokee WJ models are not covered by this list. Confirm your vehicle’s year, model and trim before ordering.
What’s included
One front pipe to manifold seal. No other parts are described.









