Overview
The Jeep 68229211AA is a front drive shaft boot kit with boots and clamps for the 2007–2017 Jeep Wrangler JK. It is a factory style replacement part.
It covers the 2-door and Unlimited four-door JK models, including the Rubicon, Sahara and Sport versions and their Unlimited counterparts.
Key features
- Boot and clamps included
- Factory style replacement part
- Front drive shaft application
Drive shaft boot wear
The boot on a front drive shaft seals the CV joint, keeping grease in and grit and water out. Once a boot tears or its clamp loosens, dirt enters and grease escapes, and the joint begins to wear. Torn boots are often found during tire rotations or when the axle is greasy underneath.
When replacing a boot, clean the joint thoroughly and inspect it for pitting or play before packing it with fresh grease. Use the clamps supplied with the kit, and make sure the boot sits in its groove without twisting. Check the boot again after a few drives to confirm it is seated and not rubbing.
- Look for cracked or torn boot folds
- Check for grease spray on the inside of the wheel
- Replace clamps when reusing is not advised
Specifications
| Brand | Jeep |
|---|---|
| Part number | 68229211AA |
| UPC | 700007526391 |
| Type | Front drive shaft boot kit |
| Position | Front |
| Includes | Boot and clamps |
Vehicle fitment
It fits the 2007–2017 Jeep Wrangler JK, in both 2-door and Unlimited four-door models.
The 2018 JK model year is not on the list, and the JL is not included. Confirm your vehicle’s year, model and trim before ordering.
What’s included
Front drive shaft boot and clamps.









