Overview
The Crown Automotive 68027602AA is a drive belt tensioner for serpentine belt systems. It applies spring force to keep the belt against the pulleys.
Check your vehicle’s belt layout against this tensioner before ordering, since no make, model or model year is tied to it.
Key features
- Drive belt tensioner for serpentine belt systems
- Applies spring force to keep belt tension
- Part number 68027602AA
- UPC 70000692294
Signs of a worn tensioner
A drive belt tensioner keeps the belt at the right tension as the engine warms, cools and works through its load range. When the spring weakens or the pivot wears, the belt can slip, squeal or ride off the pulleys. Those symptoms often appear first on a cold start or during acceleration, when the belt needs the most grip.
Inspect the tensioner by moving the arm through its full range by hand. It should move smoothly and return under spring force without grinding or sticking. Check the pulley bearing for play, and look for cracks in the belt or glazing on its ribs. When one component is worn, the belt and nearby pulleys often need attention too.
- Squeal on cold starts
- Arm moves unevenly or sticks
- Belt ribs cracked or glazed
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 68027602AA |
| UPC | 70000692294 |
| Component | Drive belt tensioner |
| Belt system | Serpentine |
Vehicle fitment
This tensioner is not tied to any make, model or model year. Confirm it against your engine’s belt routing before installing.
Match your year, model and trim to this tensioner before ordering.
Installation notes
After replacing a tensioner, check that the belt seats in every pulley groove and that the tensioner arm moves freely through its range. Disconnect the battery before working near the belt drive.
What’s included
The tensioner is the only item covered by this part number. Check the package contents for a belt, bolts and pulleys before installing.









