Overview
The Crown Automotive 53007449AC is a front hub assembly for Dana 30 front axles. It comes with the bearings and seals, so the hub arrives as one unit. It fits the 1999 to 2001 Jeep Cherokee XJ and the 1999 to 2006 Jeep Wrangler TJ.
A front hub carries the wheel bearings and mounts the wheel to the axle. Because the bearings and seals come with this assembly, you do not need to buy them separately to complete the hub.
Hub care and upkeep
A hub with bearings and seals built in keeps the wheel bearings under one assembly, so the main concern at installation is setting them correctly. Preload that is too tight heats the bearing and shortens its life, while preload that is too loose lets the wheel rock and wear the races. Use a torque wrench where possible, and tighten in the sequence the axle service procedure calls for, checking the wheel spin after each step.
Inspect the hub after the first drives on rough roads. Look for grease on the rotor or drum face, a hub that feels hot after a short drive, or a clicking sound at low speed. Those signs point to a seal or bearing problem that should be checked before it spreads to the axle. Keep a record of when the hub was last serviced so the next check is not missed.
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 53007449AC |
| UPC | 848399041859 |
| Axle | Dana 30 front |
| Position | Front |
| Included | Bearings and seals |
Vehicle fitment
It fits the 1999 to 2001 Jeep Cherokee XJ in the Classic, Limited, SE and Sport trims, and the 1999 to 2006 Jeep Wrangler TJ in the 65th Anniversary Edition, Rubicon, SE, Sahara, Sport and X trims.
Other Cherokee years, the Grand Cherokee and the Wrangler YJ, JK and LJ are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Set the wheel bearing preload and torque the hub fasteners to the values for your Dana 30 axle before reassembly, since the bearings and seals are already part of this assembly.
What’s included
One front hub assembly with bearings and seals. Check the package contents against your installation before starting, including any studs or fasteners you need.






















