Overview
The Crown Automotive J0645789 is a large flat left-hand (LH) differential spider gear washer for Dana 41, 44 and 53 differentials. It fits 1949–1971 Jeep models, including the CJ3, CJ5, CJ6, Commando, FC models and Willys CJ and Sedan Delivery models.
A spider gear washer sits behind a differential spider gear. This washer is the large flat version, marked LH.
Key features
- Large flat washer
- Left-hand (LH) version
- For Dana 41, 44 and 53 differentials
- Crown Automotive part number J0645789
Rebuilding a spider gear set
Spider gears sit on a cross pin inside the differential case and turn against the side gears. Washers behind each spider gear control the clearance between the gear and the case, and that clearance sets how smoothly the gears rotate and how much wear they take. Getting the washer thickness and side right keeps the gears from binding or running loose.
When rebuilding, replace the washers together with the spider gears and the side gear thrust washers if they show wear. Check the case for scoring or heat marks, measure the gear backlash, and look for chipped teeth. A worn case or gear set is a reason to replace the washers too, since they cost far less than a second teardown.
Keep the parts in the order removed and lubricate them with gear oil as they go back in.
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | J0645789 |
| Type | Large flat washer |
| Side | LH (left-hand) |
| Axle | Dana 41, 44 and 53 differential |
Vehicle fitment
It fits the 1959 and 1959–1968 Jeep CJ3, CJ5 and CJ6 (Base), the 1966–1971 Commando (Base), the 1957–1964 FC150 and FC170 (Base), the 1949–1952 and 1954–1958 Willys CJ-3, the 1955–1958 Willys CJ-5, the 1956–1958 Willys CJ-6 and the 1952–1955 Willys Sedan Delivery.
Other Jeep models and years are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Confirm you need the LH (left-hand) washer for the side you are rebuilding before fitting.
What’s included
One large flat LH washer.









