Overview
The Crown Automotive Cylinder Head Bolt, part number J3172330, is a replacement bolt for a cylinder head. It is a direct fit replacement. Confirm fit for your year, model and trim before ordering.
Because the bolt holds the cylinder head to the block, use the bolt size and specification from your engine’s documentation to confirm it matches the original.
Key features
- Replacement cylinder head bolt
- Crown Automotive part number J3172330
- Direct fit replacement
- Clamps the cylinder head down onto the engine block
Before you tighten the bolts
Head bolts are tightened in a set pattern in several passes, which brings the head down evenly onto the gasket. Uneven tightening can warp the head or crack the gasket, so the pattern matters as much as the final value. A torque wrench, clean threads and a dry, undamaged bolt hole are the basics for a sound clamp.
Look at the old bolt before discarding it. Stretched shanks, damaged threads and a rounded head all point to a bolt that should not be reused. If the old bolts show heavy corrosion or oil in the threads, cleaning the holes and checking for cracks in the block is part of the job.
- Use a torque wrench and follow the tightening pattern
- Clean threads and blind holes before installing
- Replace bolts that show stretching or thread damage
- Inspect the block around the bolt holes for cracks
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | J3172330 |
| UPC | 848399058161 |
| Product type | Cylinder head bolt |
| Fitment | Direct fit |
Vehicle fitment
Crown Automotive lists direct fit for this bolt, but no vehicle year, make, model or trim is named. The bolt cannot be matched to a specific vehicle from this information alone.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Cylinder head bolts are normally tightened in sequence and to the values in the engine’s service information. Reuse rules for head bolts also vary by engine, so follow the service manual for your engine.









