Overview
The Crown Automotive 5184331AC is a lower intake manifold gasket for the 3.6L engine, sealing the intake manifold to the cylinder head. Six are required for this position, so plan to order a full set.
It fits several Dodge, Jeep and Ram vehicles, including the 2011–2017 Dodge Durango, 2011–2018 Dodge Journey, 2014–2017 Jeep Cherokee KL, 2011–2017 Jeep Grand Cherokee WK, and 2012–2018 Jeep Wrangler JK. Confirm your model against the coverage below.
Key features
- Lower position gasket
- Seals intake manifold to cylinder head
- Six are required for this position.
- Direct-fit design per the manufacturer fitment list
Before the intake comes off
The lower intake manifold sits over the engine and seals the intake passages to the cylinder head. Its gasket surfaces can trap old sealant and carbon, which makes a clean sealing surface important. Before removing the manifold, note the hose and vacuum line routing so the reinstallation matches.
Take care with coolant passages and electrical connectors, which can be damaged if the intake is pried away. Check the head and manifold faces for flatness and cracks after cleaning, since an uneven surface can leak even with new gaskets. Tighten fasteners in the sequence required for your engine, and re-check them after the engine has run and cooled.
- Label hoses and vacuum lines
- Clean old gasket material from both surfaces
- Check faces for flatness and cracks
- Re-check fasteners after the first heat cycle
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 5184331AC |
| Position | Lower |
| Engine | 3.6L |
| Quantity required | 6 |
| Application | Intake manifold to cylinder head |
| Fitment type | Direct fit |
Vehicle fitment
It fits 2011–2017 Dodge Durango; 2011–2018 Dodge Journey; 2014–2017 Jeep Cherokee (KL); 2016 Jeep Cherokee (XL); 2011–2017 Jeep Grand Cherokee (WK); 2012–2018 Jeep Wrangler (JK); 2013–2017 Ram 1500; and 2014–2018 Ram ProMaster 1500, 2500 and 3500. Trims vary by model.
Cherokee XJ and KJ models, Wrangler TJ, LJ and JL models, and Grand Cherokee models outside 2011–2017 are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Plan for 6 gaskets when ordering and before starting the job. Let the engine cool fully before removing the intake manifold bolts.
What’s included
The package contains the lower gasket. Check the package count against the six needed for this position before starting the job.









