Overview
The Crown Automotive J3206691 is a rear crankshaft seal kit made as a factory-style replacement for Jeep engines. It is intended for CJ-5, CJ-6, CJ-7, Cherokee SJ, Wagoneer SJ, J-Series and Commando vehicles from 71-91, along with 84-91 Wagoneer (XJ) and a 1981 CJ-8.
Engine sizes covered are 5.0L, 5.9L and 6.6L. The fitment below is separate from the vehicle names above, so check both before ordering.
Key features
- Rear position crankshaft seal kit
- Factory-style replacement parts
- Engine notes for 5.0L, 5.9L and 6.6L engines
- Crown Automotive part number J3206691, marked Direct Fit
Replacing a rear main seal
The rear main seal sits where the crankshaft leaves the back of the engine and keeps oil from seeping past the flywheel end. Leaks here usually show up as oil on the bell housing or on the floor under the transmission. A seal kit of this type is often chosen when the old seal has begun to weep, or when the engine is being rebuilt and the rear main is already open.
Because access is limited, plan the job around the drivetrain. Removing the transmission or flywheel is the main labor cost, so replacing the clutch, pilot bearing and rear main seal together is common practice when the transmission is already out. Keep the crankshaft flange clean and check it for grooves, since a worn surface can make a new lip leak. Compare the seal dimensions with the old one before installation.
- Check the bell housing and flywheel for oil residue
- Inspect the crankshaft seal surface for scoring
- Use clean engine oil and a light coat on the lip
- Recheck for leaks after the first few drives
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | J3206691 |
| Position | Rear |
| Product type | Crankshaft rear seal kit |
| Engine notes | 5.0L engine; 5.9L and 6.6L engines |
| Kit contents | Not itemized |
| Fitment marking | Direct Fit |
Vehicle fitment
It fits the 1983 Jeep Cherokee (Wide Track Chief), 1974–1983 Cherokee (SJ), 1971–1981 CJ5, 1971–1975 CJ6, 1976–1981 CJ7, 1972–1973 Commando, 1984–1991 Grand Wagoneer (SJ), J-series trucks from 1971 to 1988 and 1972–1983 Wagoneer (SJ). Confirm fit for a 1971 Gladiator (SJ), a 1981 CJ-8 or a 1971 M-38A1 against your vehicle’s year, model and trim before ordering.
Wrangler models are not covered. Confirm fit for an 84–91 Wagoneer (XJ) against your vehicle’s year, model and trim before ordering.
Installation notes
Rear main seal jobs often require removing the transmission or flywheel, so expect more work than a front seal. Check the seal surfaces for scoring before fitting the new lip.
What’s included
The kit contents are not broken down into individual pieces. Check the package contents against your installation before starting.












