Overview
The Crown Automotive clutch bellcrank bushing, part number J3167067, is a plastic bushing for the clutch bellcrank. Two are needed, and the part is marked Direct Fit.
Neither a vehicle year nor a model is given, so measure the bushing bore and compare it with the original before installing.
Bushing fit and replacement
A clutch bellcrank bushing sits in the bellcrank pivot and lets the arm move smoothly as the clutch linkage works. Plastic bushings resist corrosion well, but they can crack, flatten or wear under constant motion, which allows play in the linkage. Because the bushing carries a fixed bore and pin, even a small change in size can cause binding or rattling.
When replacing, compare the old bushing’s outside diameter, inside bore and flange thickness with the new one before pressing it in. Check the bellcrank and pivot pin for wear, since a worn pin or bore can ruin a new bushing quickly. Lubricating the bushing and pin lightly during assembly helps it slide and reduces noise.
Keep the pivot free of grit during installation, and recheck clutch pedal travel after the first few drives.
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | J3167067 |
| UPC | 848399058017 |
| Part type | Clutch bellcrank bushing |
| Material | Plastic |
| Quantity needed | 2 |
| Stated fit | Direct Fit |
Vehicle fitment
It is a Direct Fit part for the clutch bellcrank. Confirm fit for your vehicle’s year, model and trim before ordering, including the clutch assembly.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Two are needed per installation, so confirm the quantity you receive before you begin.












