Overview
The Crown Automotive 5106043AB is a clutch master cylinder actuator for left hand drive vehicles only. It fits the 2007–2017 Jeep Compass and the 2007–2017 Jeep Patriot.
A master cylinder actuator is the hydraulic part that pushes the clutch, so confirm the drive side of your vehicle before ordering.
Key features
- Left hand drive vehicles only
- Fits 2007–2017 Compass and Patriot models
- Clutch master cylinder actuator type
- Crown Automotive part number 5106043AB
Hydraulic clutch service
A clutch master cylinder actuator works as part of a hydraulic clutch circuit, moving fluid from the pedal toward the slave cylinder. Because the fluid is under pressure, a leak or air in the line can cause a soft pedal or a clutch that does not fully release. Check the fluid level and the area around the fittings whenever the part is replaced, and watch for any fluid on the bellhousing or in the footwell.
When installing a new actuator, make sure the fittings are clean and the line connections are snug without being overtightened, then bleed the system to remove air. Use clean brake fluid of the type the vehicle calls for, and keep the reservoir covered to limit moisture. Check the clutch pedal feel and travel after installation, and test the clutch through a few gear changes before driving normally.
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 5106043AB |
| UPC | 848399093643 |
| Part type | Clutch master cylinder actuator |
| Application | Left hand drive only |
Vehicle fitment
It fits the 2007–2017 Jeep Compass and the 2007–2017 Jeep Patriot across several trims.
It is not made for right hand drive vehicles or other Jeep models. Compare your year, model, trim and drive side to this fitment before ordering.
What’s included
One clutch master cylinder actuator, Part Number 5106043AB.









