Overview
The Corbeau Baja XP 68802BPR is a pair of stationary highback suspension seats, part number 68802BPR, finished in black vinyl and cloth. Corbeau sells this version as a pair, so one order covers two front seats for off road builds that need cushioning and firm side support.
Each seat uses the Corbeau Suspension System, which provides cushioning and energy return on impact. The extra high side bolsters hold the driver in position without body shift. The seats are rated for up to a 38-40 inch waist and need additional mounting brackets for your application.
Key features
- Sold as a pair
- Vertical mounts can attach to a roll cage
- Alternative mounting with a Baja adapter and Corbeau seat brackets
- Slots for up to a 5-point harness
- Extra high side bolsters designed to prevent body shift
- Corbeau Suspension System for cushioning
Planning the mounting setup
Choosing a mount for a pair of highback seats usually comes down to the vehicle’s structure. A roll cage gives a solid anchor, so the vertical mounts should line up with the cage tubes and be fitted with suitable hardware. Where a cage is not practical, a Baja adapter and seat brackets can carry the load, but both seats must be checked for the same height and angle.
Harness anchors matter as much as seat mounts. Confirm that the anchor points are rated for the load, and route the harness so it runs cleanly through the slots without rubbing on the bolsters. Retighten all mounting hardware after the first off-road session, since suspension seats settle as they are used.
- Align vertical mounts with cage tubes
- Match height and angle on both seats
- Check harness anchor ratings before use
Specifications
| Brand | Corbeau |
|---|---|
| Part number | 68802BPR |
| UPC | 70000617750 |
| Quantity | Sold as a pair (2 seats) |
| Seat type | Stationary highback |
| Seat location | Front |
| Color | Black |
| Upholstery | Black vinyl/cloth |
| Harness | Slots for up to a 5-point harness |
| Waist fit | Up to a 38-40 inch waist (rule of thumb) |
| Fitment | Universal fit |
Vehicle fitment
The seat is rated Universal fit, so it is not matched to one vehicle. Mounting depends on your roll cage or chosen Baja adapter and the Corbeau seat brackets you use.
Because no vehicle is named, confirm the mounting method against your own roll cage or adapter setup. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Decide on the mounting method before installing. The vertical mounts can attach to a roll cage, or you can use a Baja adapter together with Corbeau seat brackets. Because the seats need additional mounting brackets, confirm the bracket set for your build first. Secure the seats fully before any off road run.
What’s included
Two Baja XP stationary highback seats in black vinyl/cloth, sold as a pair.
Not included: additional mounting brackets for your application, which the seats require.
















