Overview
Owners of the 2007–2018 Toyota Tundra can use the Roll N Lock Cargo Manager CM571, a movable truck bed divider that holds lightweight cargo at fixed points along the bed. The owner chooses where the divider sits to suit the load.
The divider is repositioned by squeezing its spring-loaded control levers from the driver’s side. Once released, the spring mechanism pins it into the next nearest slot on each side track. Roll N Lock offers it as an optional companion to its retractable tonneau covers; with a cover in place, the setup covers and secures the bed and reduces cargo shifting during abrupt stops or turns.
Key features
- Control levers at the driver’s side reposition the divider.
- The spring mechanism seats the divider in the next nearest slot on each side track.
- Lateral tie-offs and bungees secure objects of many different sizes.
- The flip-up design opens room under the divider for ladders or lumber.
- At 11 pounds, the divider is practical to take out for larger items.
- Backed by a 3-year Limited Warranty.
Setting up a rolling bed divider
A rolling bed divider works best when it is set before the load goes in. Slide it to the position that gives the cargo a firm stop, then confirm the spring mechanism has seated in a slot on both tracks before any movement. A divider that feels loose in its slot should be reset rather than driven with, because a shifting divider can let cargo slide toward the wheel well or the tailgate.
Bungees and tie-off points do most of the work on lightweight loads. Inspect the cords for fraying and stretch, check the tie-off loops for cracks or bending, and clean grit from the side tracks so the slots lock cleanly. Worn bungees are inexpensive to replace and are often the first part to need attention on a truck bed setup.
- Check slot engagement after every repositioning
- Replace frayed or stretched bungees
- Keep the side tracks free of sand and grit
Specifications
| Brand | Roll N Lock |
|---|---|
| Part number | CM571 |
| UPC | 725478162783 |
| Product type | Rolling truck bed divider (Cargo Manager) |
| Weight | 11 pounds |
| Adjustment | Spring-loaded levers |
| Securing points | Lateral tie-offs and bungees |
| Warranty | 3-year Limited Warranty |
| Companion product | Optional Roll-N-Lock retractable tonneau covers |
Vehicle fitment
It fits the 2007–2018 Toyota Tundra in the 1794 Edition, Base, Limited, Platinum, SR, SR5 and TRD Pro trims.
Model years before 2007 and after 2018, and other Toyota pickups such as the Tacoma, are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Make sure the divider has engaged a slot before driving. Use the flip-up section for ladders or lumber only when the divider is set, and remove the divider when larger items need the full bed.
What’s included
The divider is the only item included.
Not included: the Roll-N-Lock retractable tonneau cover, an optional companion that is not part of this item.
















