Overview
The Roll N Lock Cargo Manager CM221 is a rolling truck bed divider, part number RNLCM221, designed to pair with Roll N Lock retractable tonneau covers. It fits 2014–2019 Chevrolet Silverado and GMC Sierra pickups, including the 2019 Silverado 1500 LD and the 2019 Sierra 1500 Limited.
The divider runs along the bed side tracks and stops at each slot, which lets owners separate lighter loads. Levers at the driver’s side release it, and spring-loaded pins then engage the nearest slot on each track. With a retractable cover in place, the combination keeps the bed contents covered and reduces sliding during hard braking or sharp turns.
Key features
- Divider repositions along the bed rails in discrete slots
- Lever operation from the driver’s side
- Spring-loaded pins engage the next nearest slot on each side track
- Built to complement Roll N Lock retractable tonneau covers
- Helps keep lightweight cargo from sliding during braking or turns
Using the divider with a cover
A bed divider works best when it is paired with a cover that keeps the bed closed. The divider holds lighter items in separate areas so they do not slide into each other, which reduces movement and damage inside the bed. Load the heaviest items first and keep them low against the cab, then place lighter goods behind the divider.
Before each trip, confirm the pins have seated in a slot on both side tracks and that the divider does not move when you push on it. Check the side tracks for debris, dirt and grit, since these can stop the spring-loaded pins from engaging fully. Wipe the tracks clean and keep the levers free of grit.
Retractable covers also need periodic checks. Make sure the rails and seals are free of buildup, and look for cracked hardware or bent brackets after rough roads. Replace a damaged lever, pin or track part before using the bed for loose cargo.
Specifications
| Brand | Roll N Lock |
|---|---|
| Part number | RNLCM221 |
| Product type | Rolling truck bed divider (Cargo Manager) |
| Control | Levers operated from the driver’s side |
| Locking | Spring-loaded pins into side track slots |
| Companion product | Roll N Lock retractable tonneau covers |
Vehicle fitment
It fits the following: 2014–2018 Chevrolet Silverado 1500 (Custom, High Country, LS, LT, LTZ, SSV, WT); 2019 Chevrolet Silverado 1500 LD (Custom, LT, WT); 2015–2019 Chevrolet Silverado 2500 HD and 3500 HD (High Country, LT, LTZ, WT); 2014–2018 GMC Sierra 1500 (Base, Denali, SLE, SLT); 2019 GMC Sierra 1500 Limited (Base, SLE); and 2015–2019 GMC Sierra 2500 HD and 3500 HD (Base, Denali, SLE, SLT).
Fitment covers the 2014–2019 models and trims named above. Check your year, model and trim against this fit before ordering, especially for 2020 and later trucks.
Installation notes
Use the levers to release the divider, slide it to the position you want, and release. Check that the pins have seated in a slot before loading the bed.
What’s included
The product is the Cargo Manager divider. No additional hardware is described.
Not included: The Roll N Lock retractable tonneau cover is an optional companion product that the divider is designed to complement.






