Select your vehicle

Roll N Lock Cargo Manager Rolling Truck Bed Divider – CM151

Roll N Lock

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Fits the 2017–2022 Ford F-250 and F-350 Super Duty in several trims
  • Part number RNLCM151, a movable rolling truck bed divider
  • Driver’s-side squeeze levers reposition the divider along the bed side tracks
  • Spring-activated pins lock into the next nearest slot
  • Optional companion to Roll N Lock retractable tonneau covers

Description

Overview

The Roll N Lock Cargo Manager CM151 is a movable truck bed divider, part number RNLCM151, made as an optional companion to Roll N Lock retractable tonneau covers. It fits the 2017–2022 Ford F-250 Super Duty and F-350 Super Duty in several trims. It slides along the bed side tracks to hold lightweight cargo in place.

Repositioning is done from the driver’s side. Levers at that side release the divider, and its spring-activated mechanism pins it into the next nearest slot on each side track. Used with a retractable tonneau cover, the divider helps secure the bed contents and limits cargo from shifting when the truck stops or turns sharply.

Key features

  • Movable divider that travels along the bed side tracks
  • Controlled from the driver’s side by the levers
  • Spring-activated mechanism locks the divider into the next nearest slot
  • Designed to pair with Roll N Lock retractable tonneau covers
  • Intended for lightweight cargo that could otherwise shift in the bed

Using it with a tonneau cover

A divider is most useful when it works with the rest of the bed setup. A retractable cover keeps the contents out of sight and out of the weather, while the divider keeps smaller, lighter items from sliding into the open area of the bed. Plan the layout before driving so the heaviest items sit low and near the cab, where they are least likely to shift.

Clean the side tracks periodically, since grit can stop the pins from seating in a slot. Check that the divider locks in place after every move, and do not rely on it alone to hold a heavy load. Inspect the levers and pins if the divider starts to wander, because a worn pin will not hold the position it was set to.

  • Keep the side tracks free of sand and grit
  • Load heavier items toward the cab
  • Confirm the pins have seated before driving

Specifications

Brand Roll N Lock
Part number RNLCM151
Product type Rolling truck bed divider (Cargo Manager)
Control Squeeze levers, operated from the driver’s side
Locking Spring-activated pins into side track slots
Companion product Roll N Lock retractable tonneau covers

Vehicle fitment

It fits the 2017–2022 Ford F-250 Super Duty (King Ranch, Lariat, Limited, Platinum, XL, XLT) and the 2017–2022 Ford F-350 Super Duty (same trims).

Ford models outside these two Super Duty lines, such as the F-150, are not on this list. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Squeeze the control levers to release the divider, slide it to the wanted position, and let the spring mechanism pin it into the next nearest slot. Keep fingers clear of the rails and slots while the divider is moving.

What’s included

The product is the Cargo Manager divider. No additional hardware is described.

Not included: A Roll N Lock retractable tonneau cover, which the divider is made to pair with.

SKU: RNLCM151 Categories: , ,

Fitment

VehicleYearsTrims
Ford F-250 Super Duty2017–2022King Ranch, Lariat, Limited, Platinum, XL, XLT
Ford F-350 Super Duty2017–2022King Ranch, Lariat, Limited, Platinum, XL, XLT

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Will the RNLCM151 fit a Ford F-150?

No. It fits the 2017–2022 Ford F-250 and F-350 Super Duty only, in the trims named for those models. Confirm your year, model and trim before ordering.

Does the Cargo Manager work without a tonneau cover?

It is made as an optional companion to Roll N Lock retractable tonneau covers. Running it alone in the bed is outside its intended use, so confirm your setup before relying on it without a cover.

How do you move the divider along the bed?

Squeeze the control levers from the driver's side and slide the divider. Its spring-activated mechanism then pins it into the next nearest slot on each side track, which sets the new position.

What does the Cargo Manager help keep in place?

It is meant to manage and contain lightweight cargo and to stop objects from shifting in the bed when stopping or turning abruptly. Paired with a retractable tonneau cover, it also helps cover and secure the bed contents.

How do I know the divider is locked in place?

Check that both sides have pinned into a slot before loading the bed. Give the divider a firm push against the cargo to confirm it does not move. Recheck after driving on rough roads, since vibration can shift a loose divider.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon