Overview
Built for midsize pickups, the Roll N Lock Cargo Manager CM261 divides the bed and holds lightweight cargo in place. It is a rolling truck bed divider for the 2015–2018 Chevrolet Colorado and the 2015–2018 GMC Canyon, and Roll N Lock markets it as a companion to its retractable tonneau covers.
The divider can be placed at several fixed positions along the length of the bed. Pressing the spring-loaded levers releases it along the side tracks, and when you let go the spring-activated pins lock it into the next nearest slot. Lateral tie-offs and bungees extend its use to odd-shaped loads, and with a cover installed the pair limits objects sliding in the bed during stops and turns.
Key features
- Squeezing the spring-loaded levers repositions the divider from the driver’s side.
- Spring-activated pins engage the next nearest slot on each side track.
- Lateral tie-offs and bungees hold objects of all shapes and sizes.
- The flip-up design lets ladders and lumber be loaded under the divider.
- At 11 pounds, it is practical to remove for larger items.
- Backed by a 3-year Limited Warranty.
Midsize pickup bed tips
Midsize beds are shorter, so every inch of divider position counts. Measure the cargo you carry most often before choosing a slot, and leave room for the flip-up section when you need access to items beneath it. Place the divider so the largest pieces sit against the cab side where they can be secured.
A divider that has been moved often needs a quick check. Confirm that each side has seated in the same slot, since uneven seating can make the divider sit crooked. Look at the spring pins and levers during routine checks, and keep the side tracks clear of dirt that could block a clean lock.
- Measure your most common cargo before choosing a slot
- Confirm both sides seat in the same slot
- Keep the flip-up section clear before closing it
Specifications
| Brand | Roll N Lock |
|---|---|
| Part number | CM261 |
| UPC | 725478167481 |
| Product type | Rolling truck bed divider |
| Weight | 11 pounds |
| Operation | Spring-loaded control levers |
| Tie-off points | Lateral tie-offs and bungees |
| Warranty | 3-year Limited Warranty |
| Companion product | Optional Roll-N-Lock retractable tonneau covers |
Vehicle fitment
This CM261 divider is listed by Roll N Lock for the 2015–2018 Chevrolet Colorado in Base, LT, WT, Z71 and ZR2 trims, and the 2015–2018 GMC Canyon in All Terrain, Base, Denali, SL, SLE and SLT trims.
Full-size Silverado and Sierra pickups, and model years outside 2015–2018, are not covered by this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Work the levers by hand and check that the divider has locked into a slot before you drive. Load ladders or lumber beneath the flip-up section only after the divider is set, and remove the divider if a large load needs the whole bed.
What’s included
The divider is the item supplied here. Look over the parts in the box before starting the install.
Not included: Roll-N-Lock tonneau covers, which are optional companion products and are not part of this item.
















