Overview
The Roll N Lock Cargo Manager CM112 is a rolling truck bed divider, an optional companion product for Roll-N-Lock tonneau covers. It moves along the length of the bed to manage and contain lightweight cargo.
The divider is controlled from the driver’s side. Squeezing the control levers repositions it, and a spring-activated mechanism pins it to each side track in the next nearest slot. Combined with a Roll-N-Lock retractable tonneau cover, it helps stop objects shifting in the bed when stopping or turning abruptly.
Key features
- Movable truck bed divider for lightweight cargo
- Spring-loaded control levers adjust divider position
- Lateral tie-offs and bungees secure objects
- Flip-up feature lets ladders or lumber load under the divider
- Weighs 11 pounds and can be removed for larger items
- 3-year Limited Warranty stated by Roll-N-Lock
Loading and securing cargo
A rolling divider is meant to keep light cargo from sliding in the bed, such as bags, coolers, or small tools. It works best when cargo is placed against the divider and tied off, rather than piled loosely where it can shift when the vehicle brakes or turns hard.
Check the side track slots and locking points periodically for dirt, grit or wear, and keep the control levers clean so the divider seats fully each time. If the divider rattles or moves when locked, stop and re-seat it before driving. Tonneau cover seals and tracks should also be inspected, since they are often serviced alongside the divider.
- Keep heavy items low and centered
- Use the tie-offs and bungees on every trip
- Clean tracks after muddy or wet use
Specifications
| Brand | Roll N Lock |
|---|---|
| Part number | CM112 |
| UPC | 725478162042 |
| Part type | Rolling truck bed divider (Cargo Manager) |
| Weight | 11 pounds |
| Controls | Spring-loaded control levers on the driver’s side |
| Warranty | 3-year Limited Warranty |
Vehicle fitment
The divider works as a companion to Roll-N-Lock tonneau covers. Confirm bed size and side track compatibility for your vehicle’s year, model and trim before ordering.
Bed size and side track compatibility vary by vehicle. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Follow the included installation instructions and tighten all fasteners to the specified torque. Check that the divider locks into the side track slots and that the tie-offs hold before driving. Keep loads light and secured, since the divider is designed for lightweight cargo. Test fit before final tightening and check clearance with doors, the hood, the tailgate and moving parts. Protect paint and trim with masking tape or a soft cover during installation, use only the specified hardware, and re-check the attachment periodically afterwards.
















