Overview
The California Super Trucks Steering Stabilizer, part number CSR-2942, is designed for use with CST 6-8 in. and 9-11 in. lifts. It is a direct fit, so confirm the lift height you run before choosing this stabilizer.
Key features
- Steering stabilizer for CST lift applications
- Named for CST 6-8 in. and 9-11 in. lifts
- Direct fit
- Part number CSR-2942
Lift height and steering
A steering stabilizer on a lifted truck works harder than on a stock one, because raised geometry and larger tires change the forces on the steering. Matching the stabilizer to the lift range keeps the damping and mounting points where they belong.
Before installing, measure the lift height and confirm it falls within the range the stabilizer is made for. Inspect the bushings, mounts and steering box for play, since a worn part can make a new stabilizer feel loose. Keep bolts snug and recheck them after the first few drives.
After installation, have the front alignment checked. Look for uneven tire wear, a wandering steering wheel or a clunk over bumps, which can point to worn steering joints that should be replaced alongside the stabilizer.
- Measure lift height before buying
- Inspect bushings and mounts for wear
- Have the alignment checked after install
Specifications
| Brand | California Super Trucks |
|---|---|
| Part number | CSR-2942 |
| UPC | 70000540445 |
| Lift compatibility | CST 6-8 in. and 9-11 in. lifts |
| Fitment description | Direct Fit |
Vehicle fitment
It is a direct fit for the two lift ranges above. Match the year, model and trim to the stabilizer before ordering, and check it against your installed lift height.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the stabilizer is named for specific lift ranges, confirm your lift height falls within them before installing it, then have the steering alignment checked.
What’s included
The stabilizer is supplied alone. Plan for any hardware and bushings separately.









