Overview
The California Super Trucks CSE-C16-2 is a 2 inch coil spring spacer lift kit made of urethane, sold as a two-piece set for the front. Coil spring spacers add ride height by sitting between the coil spring and its seat.
Front spacers and steering
A front coil spring spacer adds height at the spring seat, so the front of the vehicle rides higher while the rear stays where it was. The gap between front and rear changes the angle of the front driveshaft and the geometry of the control arms, which is why many owners set the rear height to match. Take measurements before and after to confirm the change is level.
Front spacers can also change how the steering feels at speed, so check the tie rod ends, the steering stabilizer and the sway bar links for wear before installing. A careful inspection of the upper and lower ball joints is worth doing at the same time. Retorque the spring hardware after the first few drives, and recheck alignment with the new height.
Specifications
| Brand | California Super Trucks |
|---|---|
| Part number | CSE-C16-2 |
| UPC | 700005403867 |
| Lift height | 2 in. |
| Material | Urethane |
| Pieces | 2 |
| Position | Front |
Vehicle fitment
Check the year, model and trim against your vehicle before ordering, and confirm the front coil springs suit a 2 inch spacer.
Installation notes
Support the vehicle securely on jack stands before working on the front suspension, and follow the included instructions.
What’s included
Two urethane spring spacers and complete installation instructions.









