Overview
The California Super Trucks CSS-C1-13 is a self contained front lift kit for the 2014 to 2018 Chevrolet Silverado 1500 and GMC Sierra 1500. It raises the front 3.5 to 5.5 inches and includes spindles, spacers, brake lines and hardware.
The kit uses 1/4 inch laser cut steel lift spindles with CNC machined lift ball joint tapers. It keeps OEM handling and ride quality, and it is made in the U.S.A.
Key features
- 3.5 to 5.5 inch front lift
- 1/4 inch laser cut steel lift spindles
- CNC machined lift ball joint tapers
- Two pairs of spacers included
- Steel braided DOT approved brake lines
- Provides high ground clearance at the front
- Self contained front kit, made in the U.S.A.
Front suspension upkeep
Spindle based lift kits change the geometry at the front wheel, so the joints and bushings that connect to the spindle are worth checking at install and at regular service. Ball joints, tie rod ends and the sway bar links should be inspected for play before the lift is set, since replacing a worn part afterward is harder.
Steel braided brake lines are built for flexibility, but they still need an occasional look for chafing, kinks or leaks, especially near the fenders and the caliper. Keep the lines clear of hot exhaust parts and sharp edges. After any front work, a wheel alignment restores the proper angles and helps tire life. Tire wear that changes across the surface is a signal to recheck the alignment.
- Inspect ball joints and tie rod ends for play
- Check brake lines for chafing near the fender
- Keep an eye on tire wear after the lift
Specifications
| Brand | California Super Trucks |
|---|---|
| Part number | CSS-C1-13 |
| UPC | 700008276241 |
| Lift | 3.5 to 5.5 inches, front |
| Spindles | 1/4 inch laser cut steel |
| Spacers | Two pairs |
| Brake lines | Steel braided, DOT approved |
| Position | Front |
Vehicle fitment
It fits the 2014-2018 Chevrolet Silverado 1500 and the 2014-2018 GMC Sierra 1500 across several trim levels. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Spindle and brake line changes need a wheel alignment afterward. The kit is self contained and includes the hardware needed for the front install.
What’s included
Included: lift spindles, two pairs of spacers, steel braided brake lines and hardware.














