Overview
The TEXA4200 is an Extend-A-Goose gooseneck coupler for 2-5/16 inch balls, rated at 24,000 lbs trailer weight and 6,000 lbs tongue weight.
The coupler offsets the trailer by 10 inches, which adds clearance at the tailgate and trailer for easier hookups. It is self-aligning with a funnel-shaped opening that helps guide the ball in. Its heavy wall tube with internal gussets adds strength.
It has a sleek OEM appearance, accommodates a padlock for theft prevention, and fits standard round trailer tubes with a 4 inch I.D. It is made for gooseneck trailers.
Key features
- Self-aligning coupler design
- Funnel-shaped coupler for easier hookups
- Heavy wall tube with internal gussets
- Offsets the trailer by 10 inches
- Accommodates a padlock for theft prevention
- Fits standard round trailer tubes with a 4 inch I.D.
- Sleek OEM appearance
- Limited Lifetime Warranty
Gooseneck hookup basics
A gooseneck coupler sits over the truck’s ball and carries the trailer’s weight, so hookup is a matter of careful alignment. Back the truck slowly until the ball is under the coupler opening, then lower the trailer and confirm the latch closes fully. Self-aligning designs make this easier, but the final check should always be visual and by hand.
Between tows, inspect the coupler for cracks around the tube, worn latch parts, and any bend in the tube. Check the ball for flat spots or pitting, since a worn ball can reduce the grip of the coupler. When the trailer is parked, a padlock through the latch can deter theft, but it does not replace a properly closed latch during travel.
Specifications
| Brand | B&W Hitch |
|---|---|
| Part number | TEXA4200 |
| UPC | 843233000054 |
| Coupler type | Extend-A-Goose gooseneck |
| Ball size | 2-5/16 inch |
| Trailer weight | 24,000 lbs |
| Tongue weight | 6,000 lbs |
| Offset | 10 inches |
| Tube fit | Standard round trailer tube, 4 inch I.D. |
| Construction | Heavy wall tube with internal gussets |
| Theft protection | Padlock accommodation |
| Warranty | Limited Lifetime Warranty |
Vehicle fitment
This coupler is for gooseneck trailers and has no vehicle year, make or model fitment. Match the 2-5/16 inch ball and the 4 inch I.D. tube rather than relying on a fit label, since a gooseneck coupler works only with matching sizes.
The coupler is for gooseneck trailers; a bumper-pull trailer needs a different hitch. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Confirm the trailer’s coupler opening matches a 2-5/16 inch ball before hookup. The coupler fits a 4 inch I.D. round tube, so measure the trailer tube before installation. Gooseneck hookups carry heavy loads, so review the truck’s towing and payload ratings before connecting.
What’s included
Confirm the coupler and any hardware are present before connecting the trailer.








