Overview
The Bushwacker Ford F-150 Pocket Style Rear Fender Flares, part number 20080-02, are a pair of rear flares for the 2009-2014 Ford F-150. Bushwacker designed them for the F-150 to complement oversized tires and high-clearance lift kits, and they carry the recessed stainless steel bolts of the Pocket Style line.
Each flare is molded from thick, warp-resistant Dura-Flex 2000 that is UV protected, so the matte black finish will not chalk. The width and coverage is 1.5 inches. Installation requires minimal drilling, so mark and check each mounting point on the body before drilling any panel.
The OEM-style finish is easy to paint if you want the rear flares to match the body.
The front pair is part 20079-02 and the full four-flare set is part 20929-02. The rear pair alone covers only the rear positions, so confirm the part number matches the number of flares your truck needs before fitting.
Key features
- Rear pair with 1.5 inches of width/coverage
- Recessed stainless steel bolts for a bolt-on look
- Minimal drilling required, per the manufacturer
- Thick, warp-resistant Dura-Flex 2000 material
- OEM-style matte black finish that is easy to paint
- Made in the USA
Preparing the mounting points
Rear flares for a lifted or tire-heavy F-150 do more than add width. They change how the tire sits relative to the wheel well, and they shield the rear quarter panels from thrown debris. Because the flare bolts into existing body panels, the mounting points set the final position, so the flare should be held in place and checked before any holes are made.
Start by cleaning the area and checking the fender liner for brackets that may interfere. Mark each hole with a fine point, then drill slowly and deburr the edges. Seal exposed holes with a suitable touch-up paint to limit corrosion. After mounting, check tire clearance with the suspension at full compression and at full extension, and recheck the bolts after the first few drives.
- Test-fit the flare before drilling
- Deburr and seal every drilled hole
- Recheck clearance at both ends of suspension travel
Specifications
| Brand | Bushwacker |
|---|---|
| Part number | 20080-02 |
| UPC | 90689112620 |
| Position | Rear |
| Quantity | Pair |
| Width/coverage | 1.5 in |
| Material | Dura-Flex 2000 (warp-resistant) |
| Finish | OEM matte black, paintable |
| Mounting | Recessed stainless steel bolts, minimal drilling |
| Companion parts | Front pair 20079-02, or set 20929-02 |
Vehicle fitment
It fits the 2009-2014 Ford F-150 in trims including FX2, FX4, Harley-Davidson Edition, King Ranch, Lariat, Lariat Limited, Limited, Platinum, STX, XL and XLT.
The list stops at 2014 and does not include the 2004-2008 F-150, the 2015 and later F-150, or the Super Duty. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Bushwacker says minimal drilling is required, so mark and check each mounting point on the body before drilling any panel.
What’s included
A pair of rear Pocket Style fender flares with recessed stainless steel bolts.









