Overview
The Bushwacker Ford Cut-Out Front Fender Flares, part number 20047-02, are a pair of paintable front flares for off-road Ford trucks. They are built for the Ford Super Duty. Confirm fit for your vehicle’s year, model and trim before ordering.
The Cut-Out design is meant for maximum articulation rather than a flush factory look. Installing these flares means cutting the front body sheet metal so the tire has room at full suspension travel. The listed width/coverage is 5 inches.
Bushwacker molds the flares from its Dura-Flex 2000 material, which the company describes as thick, warp-proof and UV protected. The matte black finish looks finished as it is and can be painted to suit the body color.
Key features
- Cut-Out design removes sheet metal for maximum wheel articulation
- Front pair with 5 inches of width/coverage
- Dura-Flex 2000 material is thick and warp-proof
- UV protection guards against chalking
- Bolt-on mounting with stainless steel hardware
- OEM matte black finish that is easy to paint
- Made in the USA
Before cutting any sheet metal
Cut-out fender flares change the body permanently, so the decision deserves more thought than a bolt-on accessory. Once the front sheet metal is removed, the opening stays open, and a repair means welding or fabricating a new panel. Many owners test-fit the flare with the wheels and tires they plan to run, checking that the tire clears the opening at full steering lock and at full suspension travel before any metal is cut.
Paint is best applied after the flares are fitted and checked. Plastic-type flares accept paint, but the surface should be cleaned with a suitable prep product first, and the paint should be a flexible type made for plastic body parts. Painting before mounting makes trial fitting harder because a finished edge is easy to scratch.
- Mark and measure the cut line twice before any cutting
- Check steering and suspension clearance with the real tires
- Seal any bare metal edge before fitting the flare
- Keep front and rear flare finishes matched
- Inspect bolts and mounting points after the first trail runs
Specifications
| Brand | Bushwacker |
|---|---|
| Part number | 20047-02 |
| UPC | 90689113696 |
| Position | Front |
| Quantity | Pair |
| Width/coverage | 5 in |
| Material | Dura-Flex 2000 (Bushwacker proprietary) |
| Finish | OEM matte black, paintable |
| Companion rear part | 20046-02 or 20044-02 |
Vehicle fitment
This front pair is built for the Ford Super Duty. Confirm fit for your vehicle’s year, model and trim before ordering.
Do not assume the front flare fits every Super Duty year. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Cut-Out flares require cutting the front body sheet metal, which is permanent. Bushwacker refers to the installation guide for your specific model for the complete steps, so use that guide before marking or cutting any panel.
What’s included
A pair of front Cut-Out fender flares with stainless steel bolt-on hardware.
Not included: The rear pair, which Bushwacker lists separately as part 20046-02 or 20044-02.








