Overview
The 31020-11 is a pair of Cut-Out rear fender flares for the 1989 to 1995 Toyota Pickup, covering the Base, DLX and SR5 versions. The flares are built to maximize wheel travel off-road while keeping tire coverage for oversized tires, and they add 3 inches of width and tire coverage.
The Cut-Out design removes body sheet metal, which lets the tire move further through its travel. Each set is individually designed for its vehicle and installed with rivets. The flares are made from thick Dura-Flex 2000 that resists chalking, and the matte black surface can be painted. Removing sheet metal rather than covering it gives the wheel more room off-road, and the custom approach gives a smoother appearance and greater strength.
Key features
- Cut-Out rear design for maximum wheel articulation
- 3 inches of width and tire coverage
- Individually designed for each vehicle
- Rivet installation
- Dura-Flex 2000 with UV protection
- OEM matte black finish that can be painted
Measuring before you cut
Measuring is the most important step with a Cut-Out flare because the cut cannot be undone. Check the tire’s full travel, the steering lock and the suspension compression, then mark the cut line with painter’s tape before using any tools. Make small, careful passes and stop to test fit often.
Tire size and wheel offset affect how far the tire extends, so confirm the tire will fit with the planned flare before cutting. Plan to protect the exposed metal along the cut right after cutting. Recheck the fit after the rivets are installed, since the flare can shift slightly as it is fastened.
Keep the front pair in mind if the front wheels also need extra room, since the front and rear parts are sold separately.
Specifications
| Brand | Bushwacker |
|---|---|
| Part number | 31020-11 |
| UPC | 90689103321 |
| Position | Rear |
| Width and tire coverage | 3 inches |
| Quantity | Sold as a pair |
| Fit type | Direct fit |
| Material | Dura-Flex 2000 |
| Finish | OEM matte black, paintable |
| Model years | 1989 to 1995 Toyota Pickup |
Vehicle fitment
The fit covers the 1989 to 1995 Toyota Pickup. The 1984 to 1988 pickups use a different Cut-Out pair, so this one should not be installed on those years.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Sheet metal has to be cut for these flares to clear the tire, and the cut cannot be undone. Bushwacker recommends reviewing the installation guide for the specific model before cutting.
What’s included
One pair of rear Cut-Out fender flares.
Not included: the front pair (part 31019-11) is sold separately.









