Overview
This Bushwacker Extend-A-Fender Flare Set, part number 20904-11, covers the front and rear of a Ford running oversize wheels and tires, using four paintable flares. Check the fit against your truck’s year, model and trim before buying.
The flares are made from Bushwacker’s Dura-Flex 2000 material, which is built for durability and flexibility, with UV protection built in. The smooth OEM-style matte black finish can stay as supplied or be painted for a personalized look.
Each position has 1.75 inches of width and coverage. The set installs in minutes with only minimal drilling.
The 1.75-inch coverage applies to each position, so measure it against the tire width you plan to run on the front and on the rear.
Key features
- Four flares in a front and rear set
- 1.75 inches of width/coverage
- Minimal drilling required for mounting
- Dura-Flex 2000 material with built-in UV protection
- Smooth matte black OEM-style finish that is easy to paint
Paint and finish care
A matte black OEM-style finish on a flexible molded flare is designed to hold its look, but the surface still needs regular care. Wash with mild soap and water, rinse thoroughly, and avoid harsh solvents that can dull the finish. Because the flares sit low on the truck, they collect road grime, sand and salt, so rinse the underside after trail or winter use.
If you choose to paint the flares, clean them thoroughly and scuff the surface lightly first. Use a primer made for flexible plastics and apply thin coats of color, then allow the paint to cure fully before mounting. Painted flares show chips more easily than matte black, so plan a touch-up routine and inspect the edges each season for early wear.
- Rinse the underside after muddy drives
- Use mild soap rather than harsh solvents
- Touch up chips before they spread
Specifications
| Brand | Bushwacker |
|---|---|
| Part number | 20904-11 |
| UPC | 90689104212 |
| Quantity | Set of 4 |
| Position | Front and rear |
| Width/coverage | 1.75 in |
| Material | Dura-Flex 2000 |
| Finish | OEM-style matte black, smooth, paintable |
| Front pair part number | 20019-11 |
| Rear pair part number | 20020-11 |
Vehicle fitment
The set is made for a Ford running oversize wheels and tires. Model years, chassis codes and trims must be matched to your truck before purchase.
Match your year, model and trim to the set’s intended fit before ordering, and compare them with the flare dimensions for your tires.
Installation notes
Minimal drilling is needed, so check the mounting points before drilling any holes into the body panels.
What’s included
A set of four Extend-A-Fender flares, front and rear.









