Overview
The Bushwacker Pocket Style front fender flare pair, part 10029-07, is made for the front of the Jeep Wrangler TJ. The flares add 6 inches of width and tire coverage and are designed to complement oversized tires and high-clearance lift kits. They fit the 1997 to 2006 Jeep Wrangler TJ.
The flares use recessed stainless steel bolts in the pocket style and are molded from Dura-Flex 2000 TPO, a thick and flexible material that is 100% UV protected so it will not chalk. They install with no body-side drilling and can be left in the OEM matte black finish or painted.
Key features
- Pocket style design with recessed stainless steel bolts
- 6 inches of width and tire coverage from debris
- Installs with no body-side drilling
- Dura-Flex 2000 TPO, 100% UV protected
- OEM matte black finish that is easy to paint
- Made in the USA with a limited lifetime warranty
Fitting flares to the front fenders
Fender flares change the front fender line, so they are as much a fit job as a bolt-on. Before mounting, check how the flare edges sit against the fender lip and the bumper, and make sure the front wheels and tires have clearance at full lock. Oversized tires and lift components can change the clearance, so recheck after any suspension or tire change.
Front flares often trap mud and road spray, so clean the inner edges regularly and inspect the fasteners after rough driving. Flexible TPO takes paint well when the surface is lightly scuffed and primed. Keep the finish clean and check for loose or cracked mounting points during routine service.
- Clearance at full steering lock
- Fender lip and bumper alignment
- Cleaning mud from inner edges
- Paint prep before painting
Specifications
| Brand | Bushwacker |
|---|---|
| Part number | 10029-07 |
| UPC | 90689112088 |
| Position | Front |
| Quantity | Pair |
| Width and coverage | 6 inches |
| Material | Dura-Flex 2000 TPO |
| Finish | OEM matte black, paintable |
| Rear pair part number | 10030-07 |
| Set part number | 10908-07 |
Vehicle fitment
The pair fits the 1997 to 2006 Jeep Wrangler TJ, covering the Wrangler models from those years.
The list covers the TJ generation only, so the Wrangler YJ, the 2007 to 2018 Wrangler JK and the Wrangler JL are not included. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The front flares install with no body-side drilling, so the work is fitting the pair to the front fenders and checking clearance at the tire. The front pair covers only the front fenders, so the rear fenders need the rear pair, part 10030-07, to match. Because the pocket style is designed for oversized tires, recheck steering clearance after mounting.
What’s included
A pair of front Pocket Style flares. The rear pair is part 10030-07, and the full set is part 10908-07.









