Overview
The Bushwacker 50920-85 is a set of four pre-finished OE style color matching fender flares in Brilliant Black Crystal Pearlcoat. It fits the 2016 to 2018 Ram 1500 and the 2019 Ram 1500 Classic, and covers the front and rear. It adds up to 0.50 inches of tire coverage from debris.
The flares come pre-finished to match the paint on a new truck, so no paint work is needed before mounting. The Dura-Flex 2000 material is made in the USA, is warp-resistant, and is 100 percent UV protected. The edge trim and stainless steel hardware come installed, so mounting does not require drilling.
Key features
- Pre-finished Brilliant Black Crystal Pearlcoat color
- Front and rear positions in one set of four
- Up to 0.50 inches of tire coverage from debris
- Edge trim and stainless steel hardware pre-installed
- 100 percent UV protected Dura-Flex 2000
- Made in the USA with a limited lifetime warranty
Keeping the finish looking right
Pre-finished flares skip the paint step, which means the first wash and dry set the tone for their long-term look. Use a soft mitt and a pH-neutral soap, and rinse thoroughly before drying. Avoid abrasive pads on the edges, since scratches show more on a pearl finish than on a flat black.
Road debris and salt build up along the lower edge, so a periodic rinse helps keep the flares clean. Inspect the mounting hardware after the first few drives, because a loose fastener can change the gap against the tire. A quick look at the edge trim each season catches early lifting before it spreads.
When the truck is serviced, flares should be removed carefully and reinstalled with the same hardware, so the fit stays consistent with the original install.
Specifications
| Brand | Bushwacker |
|---|---|
| Part number | 50920-85 |
| UPC | 700008511941 |
| Position | Front and rear |
| Tire coverage | 0.50 inches |
| Quantity | Set of 4 |
| Fit type | Direct fit |
| Material | Dura-Flex 2000 |
| Finish | Brilliant Black Crystal Pearlcoat, pre-finished |
| Model years | 2016 to 2018 Ram 1500; 2019 Ram 1500 Classic |
Vehicle fitment
It fits the 2016 to 2018 Ram 1500 and the 2019 Ram 1500 Classic. Ram 1500 years before 2016 and after 2019 are not covered, and the 2500 and 3500 heavy-duty trucks are not covered either.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The hardware and edge trim come installed at the factory, so mounting the set is the only job. Compare the shade against your own truck before ordering to confirm the match.
What’s included
A set of four pre-finished flares with edge trim and stainless steel hardware installed.














