Overview
The Bushwacker 40956-14 is a set of four pre-finished OE style color matching fender flares in Summit White for the 2016 to 2018 Chevrolet Silverado 1500, 2500 HD and 3500 HD. The flares are finished to match the paint on the truck, so no paint step is needed before mounting. The set covers the front and rear and adds up to 0.75 inches of tire coverage from debris.
The flares are made in the USA from Dura-Flex 2000, which is warp-resistant and tailored for each application. The edge trim and stainless steel hardware are pre-installed, and the set mounts without drilling for a secure fit.
Key features
- Pre-finished Summit White color
- Front and rear positions in one set of four
- Up to 0.75 inches of tire coverage from debris
- Edge trim and stainless steel hardware pre-installed
- 100 percent UV protected Dura-Flex 2000
- Made in the USA with a limited lifetime warranty
Summit White care and fit
Pre-finished flares sit on the truck as a finished part of the body, so the color match matters as much as the fit. Paint can vary between batches and sun can fade a painted panel over time, so compare the flare with the truck in daylight before mounting. Keep the mounting edges clean, because dirt trapped under the trim can rub the paint and leave a visible line.
The flares are made to flex slightly with the body, so avoid high-pressure washing right at the edge trim. A soft cloth and mild soap keep the finish looking fresh. Check the hardware every few months, especially after rough roads, and tighten any loose fastener before it starts to rattle.
- Compare shade in daylight before mounting
- Keep trim edges free of grit
- Check fasteners every few months
Specifications
| Brand | Bushwacker |
|---|---|
| Part number | 40956-14 |
| UPC | 700008511681 |
| Position | Front and rear |
| Tire coverage | 0.75 inches |
| Quantity | Set of 4 |
| Fit type | Direct fit |
| Material | Dura-Flex 2000 |
| Finish | Summit White, pre-finished |
| Model years | 2016 to 2018 Silverado 1500, 2500 HD and 3500 HD |
Vehicle fitment
It fits the 2016 to 2018 Chevrolet Silverado 1500 in the Custom, High Country, LS, LT, LTZ, SSV and WT versions, and the 2016 to 2018 Silverado 2500 HD and 3500 HD in the High Country, LT, LTZ and WT versions. The 2014 and 2015 Silverado years do not fit this set.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The edge trim and hardware come installed, so the job is mounting the set. Compare the Summit White shade with your truck before ordering to confirm the match.
What’s included
A set of four pre-finished Summit White flares with edge trim and stainless steel hardware installed.














