Overview
The Bushwacker Pocket Style front fender flare pair, part 10077-02, is made for the front of the Jeep Wrangler JK. It adds up to 9.50 inches of tire coverage from debris and is designed to complement oversized tires and high-clearance lift kits. The pair fits 2007 to 2018 Jeep Wrangler JK models, in both 2-door and 4-door versions.
The pocket style uses recessed stainless steel bolts and is a Bushwacker original. The pair is molded from thick, proprietary Dura-Flex 2000 TPO, which is 100% UV protected so it will not chalk. The OE textured black finish has an aftermarket look, and the flares can be painted to match or accent the body color.
Key features
- Pocket style design with recessed stainless steel bolts
- Adds up to 9.50 inches of tire coverage from debris
- Designed to look good with all wheel and tire packages
- 100% UV protected Dura-Flex 2000 that will not chalk
- OE textured black finish that can be painted
- Made in the USA with a limited lifetime warranty
Choosing a tire and lift setup
Oversized tires and higher suspension change how a front flare works. A taller tire sits farther out and higher in the wheel opening, which can change the amount of tire coverage the flare needs to provide at full steering lock.
Before buying wheels or tires, measure the tire width and the height of the new setup, then check the flare against both. Bump stops, track bar position and steering components can all limit travel, so plan for them together rather than one at a time.
Front pocket flares work best when the rest of the front end is sorted. Check tie rod ends, steering stops and alignment after a lift, since changes in geometry can move the tire into the flare faster than expected.
- Measure new tire width before ordering
- Check steering stops after a lift
- Confirm bump stop clearance at full compression
- Re-align the front end after suspension changes
Specifications
| Brand | Bushwacker |
|---|---|
| Part number | 10077-02 |
| UPC | 90689117311 |
| Position | Front |
| Quantity | Pair |
| Tire coverage | Up to 9.50 inches from debris |
| Material | Dura-Flex 2000 TPO |
| Finish | OE textured black, paintable |
| Width | Stock width |
| Rear pair part number | 10078-02 for 2-door, 10080-02 for 4-door |
Vehicle fitment
It fits the 2007 to 2018 Jeep Wrangler JK, including 2-door and Unlimited 4-door models in those years, with the 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport and X models.
The list covers the JK generation only, so the Wrangler TJ, YJ and JL are not included. Check the rear part number for your door count before choosing a rear pair. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The pocket style installs with no body-side drilling required, so the work is mainly fitting the front pair and checking the clearance at the tire. Confirm the front clearance at full steering lock once the flares are mounted.
What’s included
A pair of front Pocket Style flares. The rear pair for 2-door models is part 10078-02, and the rear pair for 4-door models is part 10080-02.


















