Overview
The Bushwacker Flat Style fender flare set, part 10919-07, is a front and rear flare kit for the 2007–2018 Jeep Wrangler JK, 2-door models. Flat style flares extend over the tires to add coverage for off-road use, and this set adds up to 9.5 inches of tire coverage from debris. The flares provide the OE tire coverage required by most state laws.
The flares are molded from Dura-Flex 2000 TPO, a thick, flexible material that is 100% UV protected, so the matte black finish resists chalking. The mounting brackets bolt straight onto the Jeep, and the flares work with the factory rocker guards and fully molded wheel well protection.
Key features
- Flat style design that maximizes tire coverage and wheel articulation for off-road use
- Adds up to 9.5 inches of tire coverage from debris
- Mounting brackets bolt onto the vehicle for added strength and simpler fitting
- Installs with no drilling or cutting
- Integrates with the factory rocker guards
- DOT-compliant LED side marker lights included
- Fully molded wheel well protection
- 100% UV protected Dura-Flex 2000 TPO with an OEM-style matte black finish that can be painted
Trail use and upkeep
Flat style flares run closer to the body than short fender flares and cover more of the tire. On the trail, that coverage helps keep mud, rocks and spray off the doors and the lower body. Larger tires or more suspension travel bring the tire closer to the flare, so check clearance at full articulation after any change to tire size or lift height.
A textured matte finish hides small scuffs better than gloss paint, and a flexible plastic material resists the chalking that fades many trim parts over time. Wash the flares with mild soap and water and avoid harsh solvents that can dull the surface. If you repaint, use a flexible coating made for plastic and let it cure fully before installing.
- Inspect mounting brackets and bolts after the first off-road trips
- Recheck tire clearance after changing tire size or wheel offset
- Clear mud from the inside of the flares so it does not trap moisture
- Use a flexible coating made for plastic if you repaint
Specifications
| Brand | Bushwacker |
|---|---|
| Part number | 10919-07 |
| UPC | 90689112347 |
| Style | Flat style fender flares |
| Position | Front and rear |
| Quantity | Set of 4 |
| Tire coverage | Up to 9.5 inches from debris |
| Material | Dura-Flex 2000 TPO |
| Finish | OEM-style matte black, paintable |
| Lighting | DOT-compliant LED side marker lights |
Vehicle fitment
This set is for the 2007–2018 Jeep Wrangler JK, 2-door models. The JK chassis code covers the 2007 to 2018 model years.
The Wrangler TJ, YJ and JL generations are outside these years, and the Cherokee and Grand Cherokee are different vehicles. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Installation needs few extra tools and little bodywork. Read through every step before starting. Check that the flares clear the tires at full suspension travel before driving on the trail.
What’s included
A set of four flat style fender flares for the front and rear of the vehicle, with DOT-compliant LED side marker lights.




























