Overview
The Bushwacker 30917-02 is an OE Style fender flare set for the Toyota Tundra, sold as a front and rear set. It is designed to look like a factory fender and to add up to three-quarters of an inch of tire coverage against debris. Before ordering, match your truck’s year, model and trim to this fit.
The flares install without drilling. The smooth, OEM-style matte black finish suits a blacked-out look, and it can be painted to match or accent the body color. The Dura-Flex 2000 material is UV protected and resists chalking.
Key features
- Adds up to three-quarters of an inch of tire coverage against debris
- Installs easily with no drilling required
- OEM matte black finish that is easy to paint
- Dura-Flex 2000 material, 100% UV protected
- Designed to complement the Tundra’s factory styling
- Made in the USA, with a Limited Lifetime Warranty
Before you install
Fender flares protect body panels by putting more of the wheel opening under cover, so rocks, mud and spray are less likely to hit the paint. On a truck used off road, the flare edges take the most abuse, so check them after tight trails. Test the clearance at full steering lock and with the suspension compressed, since a flare that clears in the driveway can rub on the trail.
Paint and finish matter as much as fit. If the flares will be painted, clean and scuff the surface, use a primer suited to flexible plastic, and keep finish off the mounting points. Mounting hardware and clips are often replaced together when a set is refitted, so keep the original fasteners in a labeled bag and inspect them before reuse.
Specifications
| Brand | Bushwacker |
|---|---|
| Part number | 30917-02 |
| UPC | 90689117120 |
| Vehicle | Toyota Tundra (model years not stated) |
| Position | Front and rear |
| Sold as | Set |
| Front pair part number | 30037-02 |
| Rear pair part number | 30038-02 |
| Tire coverage | Up to three-quarters of an inch |
| Finish | OEM matte black, smooth, paintable |
| Material | Dura-Flex 2000, 100% UV protected |
| Installation | No drilling required |
| Warranty | Limited Lifetime |
| Made in | USA |
Vehicle fitment
The set is made for the Toyota Tundra. Check the front and rear part numbers against your truck’s year, model and trim before installing.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
A front pair and a rear pair of OE Style fender flares, with the part numbers shown in the specifications.
















