Overview
The Bushwacker OE Style color matching fender flare set, part 50917-85, is a front and rear set of four flares for the Dodge Ram in Brilliant Black Crystal Pearlcoat. The flares offer more tire coverage and more clearance for trucks and SUVs. The set adds up to half an inch of tire coverage from debris.
The flares arrive pre-finished, so they can be mounted without a painting step, with the pearlcoat applied at the factory. The edge trim and stainless steel hardware are pre-installed, which keeps the fit quick and avoids drilling. The flares are made in the USA from Dura-Flex 2000, a warp-resistant material tailored for each application.
Key features
- Brilliant Black Crystal Pearlcoat finish applied at the factory
- Adds up to half an inch of tire coverage from debris
- Edge trim and stainless steel hardware pre-installed
- Installs easily without drilling
- 100% UV protected Dura-Flex 2000
- Made in the USA with warp-resistant construction
Maintaining a pearlcoat finish
A pearlcoat has a clear layer over a color base with a fine reflective effect, which makes dark paint look deep but also shows swirl marks and water spots more easily than flat black. Keep the flares clean with a gentle wash, and use a soft mitt rather than a rough brush. Hard water can leave spots if it dries on the surface, so rinse the flares after washing and dry them with a microfiber towel.
The most common wear on a black pearlcoat comes from road grit and tire contact along the lower edge. Inspect the edge each season for chips or thin spots, and clean any dust from the mounting area before reinstalling. A light coat of a protectant made for plastic or painted trim can help repel dirt, but test it on a small hidden area first.
- Wash with a soft mitt and mild soap
- Rinse and dry to avoid water spots
- Inspect the lower edge for chips each season
- Test any protectant on a hidden area first
Specifications
| Brand | Bushwacker |
|---|---|
| Part number | 50917-85 |
| UPC | 700008511841 |
| Position | Front and rear |
| Quantity | Set of 4 |
| Width and coverage | Half an inch |
| Finish | Brilliant Black Crystal Pearlcoat, pre-finished |
| Material | Dura-Flex 2000 |
| Hardware | Stainless steel, pre-installed with edge trim |
| Fitment type | Direct fit |
Vehicle fitment
The flares are sized for the Dodge Ram. Confirm your vehicle’s model year, cab and body style before installing.
The flares are shaped for a specific truck, so a Ram from a different year or body style may not sit flush with the body lines. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Since the trim and hardware are already fitted, the install comes down to setting each flare in place and checking the clearance at the tire. The black pearlcoat is factory applied, so keep the flares clean and handle them by the edges during mounting.
What’s included
Four pre-finished OE Style flares for the front and rear, in Brilliant Black Crystal Pearlcoat, with edge trim and stainless steel hardware already installed.














