Overview
The Bushwacker 40019-11 is a cut-out front fender flare pair for Chevrolet or GMC trucks. Each set is built for a specific truck to allow more off-road wheel travel and adds up to 2.50 in. of coverage against debris. Confirm fit for your truck’s year and model before ordering.
Cut-out flares are built for extreme off-road use and require cutting body sheet metal, which allows full articulation and coverage for oversized tires. The OEM matte black finish is UV protected against chalking and can be painted. Dura-Flex 2000 is a thick material that resists warping.
Key features
- Adds up to 2.50 in. of tire coverage against debris
- Sheet metal removal maximizes wheel articulation
- Bolt-on installation with stainless steel hardware
- OEM matte black finish that can be painted
- Dura-Flex 2000 material, 100% UV protected
- Made in the USA, with a Limited Lifetime Warranty
Before you cut
Any cut-out flare changes the look and protection of the front of the truck, so plan the work before picking up tools. Measure the tire size you plan to run, check steering and suspension travel, and mark the cut lines carefully. Cut-out flares are a permanent modification, so once sheet metal is removed the body cannot return to stock without repair work.
Rust is a practical concern after cutting bare edges. Treat exposed metal with a rust inhibitor or primer, and touch up scratches before the finish dries. If you plan to paint the matte black finish, sand lightly and use a paint suited to plastic flares so the color bonds well and flexes with the material.
- Measure tire clearance at full steering lock
- Mark cut lines before cutting any sheet metal
- Seal cut edges against moisture
Specifications
| Brand | Bushwacker |
|---|---|
| Part number | 40019-11 |
| UPC | 90689103451 |
| Vehicle | Chevrolet or GMC (model years not stated) |
| Position | Front |
| Sold as | Pair |
| Rear pair part number | 40004-11 |
| Tire coverage | Up to 2.50 in. |
| Style | Cut-out, sheet metal removed |
| Finish | OEM matte black, smooth, paintable |
| Material | Dura-Flex 2000, 100% UV protected |
| Warranty | Limited Lifetime |
| Made in | USA |
Vehicle fitment
Cut-out flares are made for Chevrolet or GMC trucks, and the cut depends on the specific model. Match the truck’s year, model and body style to these flares first.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Installation requires cutting body sheet metal, so the cut must match the specific model. Confirm the position before fitting, since 40004-11 is the rear pair.
What’s included
A front pair of cut-out fender flares with stainless steel hardware. The rear pair is listed separately under part number 40004-11.









