Overview
The Bushwacker Extend-A-Fender rear flares, part number B/W41024-11, are paintable rear fender flares for the Chevrolet S10, listed by the manufacturer for 1994 through 2003 models. They add 2.25 inches of tire coverage so that oversize wheels and tires sit within the fender line, which suits off-road builds that need extra clearance protection and a finished look.
Each flare is made from Bushwacker’s Dura-Flex 2000 material, which the brand describes as designed for durability and flexibility, with built-in UV protection. The flares carry an OEM-style matte black finish and can be painted to match the body. They come as a pair, so one set covers both rear wheel openings.
Key features
- Extend-A-Fender design that adds 2.25 inches of rear tire coverage
- Dura-Flex 2000 flexible material with built-in UV protection
- Paintable, with an OEM-style matte black finish from the factory
- Designed to resist chalking, cracking and warping.
- Minimal drilling is required. Mark the drill points carefully before starting.
- Supplied as a pair for both rear sides
Extend-A-Fender clearance
Flares that extend the fender line change how the tire sits in the wheel opening, so the first thing to check is clearance. Wider tires and offset wheels can contact the flare edge on compression, turns or articulation, and a light rub on the inner edge is easy to miss until it wears paint.
Paint and mounting are the next steps. Flexible flares accept paint well when the surface is prepared correctly, but they should be test-fitted first so any trimming happens before the finish. Check rear wiring, mud flap brackets and the spare tire area as the flares go on.
- Check clearance at full steering lock
- Look for rub marks after the first off-road run
- Confirm rear wiring is secured clear of the flare
- Recheck mounting points after tire changes
Specifications
| Brand | Bushwacker |
|---|---|
| Part number | B/W41024-11 |
| Position | Rear |
| Width/coverage | 2.25 inches |
| Quantity | Pair (two flares) |
| Material | Dura-Flex 2000 |
| Color | Paintable; OEM-style matte black finish |
| Fitment type | Direct fit |
Vehicle fitment
The fit covers the 1994–2003 Chevrolet S10 in Base, LS, SS and Xtreme trims. Confirm Sonoma fit for your vehicle’s year, model and trim before ordering.
Other GM trucks and SUVs fall outside this fit, as do S10 models outside the 1994–2003 years.
Installation notes
Minimal drilling is needed, so mark the drill points carefully before starting. Installation can take only minutes, though fitting time depends on your tire size and fender condition. Paint the flares before fitting for a body-color match. Disconnect the battery before working near the rear wiring.
What’s included
Two rear flares, supplied as a pair. Inventory the parts in the box before you start fitting them.









