Overview
This set includes four Extend-A-Fender flares for the Chevrolet S-10 and S-10 Blazer. The flares suit trucks that run oversize wheels and tires and need extra coverage for body protection. The set adds up to 2.25 inches of tire coverage from debris at the front and rear.
Extend-A-Fender flares are made from Dura-Flex 2000, a material that resists chalking, cracking and warping. The OEM-style matte black surface can be left as-is or painted for a personalized look. Installation takes minutes with minimal drilling. The set is made in the USA and carries a limited lifetime warranty.
Key features
- Set of four Extend-A-Fender flares for the front and rear
- Up to 2.25 inches of tire coverage from debris
- Minimal drilling required for installation
- 100 percent UV protected Dura-Flex 2000
- OEM-style matte black smooth finish that is easy to paint
- Made in the USA with a limited lifetime warranty
Oversize tires and body protection
Extend-A-Fender designs are built for trucks that carry larger tires than the factory fenders were sized for. Extra coverage helps keep spray and road debris from reaching the body and can make the wheel opening look finished. Before ordering, measure the distance from the tire edge to the stock fender, then compare it with the coverage the set offers.
Matte black plastic shows dirt in some lighting, so keep the surface clean and rinse grit from the edges. Painting the flares works well if you want a body-color match, but the paint should be applied to a clean, scuffed surface with a primer suited to plastic. Check the mounting points after the first few drives since bolts can settle.
- Measure tire-to-fender gap at full lock
- Keep spare fasteners and washers on hand
- Inspect edges after rough or muddy trips
- Store leftover touch-up paint sealed
Specifications
| Brand | Bushwacker |
|---|---|
| Part number | 41907-11 |
| UPC | 90689103703 |
| Position | Front and rear |
| Width and tire coverage | 2.25 inches |
| Quantity | Set of 4 |
| Fit type | Direct fit |
| Material | Dura-Flex 2000 |
| Finish | OEM matte black, paintable |
Vehicle fitment
Fits the Chevrolet S-10 and S-10 Blazer, so match your year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Installation needs minimal drilling. The front pair is part 41023-11 and the rear pair is part 41024-11. Check the hardware in the box against the installation steps before starting.
What’s included
A set of four Extend-A-Fender flares for the front and rear positions.









